Super Cone Rubber Fender / Marine Fender (HC1600H)

• Model NO.: HC1600H
• Shape: Cone Type
• Size: 1600h
• Marine Parts: Fender, Bumper
• Certification: BV, ISO9001, CCS, SGS, Lloyd′s
• Transport Package: Container
• Origin: Qingdao, China

• Material: Rubber
• Structure: Solid
• Type: Inland and Coastal Boats
• Usage: Ship Launching, Protection
• Trademark: TIANDUN
• Specification: CE, SGS, BV, Lloyd′s, ISO9001, H1600

Specifications
TIANDUN cone rubber Fender: 
1. PIANC standard approved 
2. Best quality and service 
3. Outstanding energy absorption 
 
Main Description of Tiandun Cone Rubber Fender:
TIANDUN cone rubber fender is the result of continuous product development. This fender design is based on the Cell Fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Its refined geometry and conical shape result in a number of outstanding performance characteristics which include:
 
1.Internal overload stopper as standard
2.Outstanding energy absorption per weight of fender
3.Very good inherent resistance against shear forces due to its geometry and self-centering characteristics
4. No reduction of energy absorption up to 10° compression angle
5.High shear stability which allows the fender to carry even larger panel weights without using chains
6. Exceptional good energy absorption to reaction force ratio (E/R)
 
Availability in heights between 350mm and 2000 mm, each in 4 different rubber grades for the most precise fender selection.

Plastic Film Dewatering Drying Machine

Plastic Film Dewatering Drying Machine is used after the plastic film/plastic agricultural film/PP woven bags/Space bag/tons bags/thin waste plastics plastic sheets washed,using the squeeze dewatering principle,squeeze the water from the plastic by rotating screw.The water will flow out from the bottom,the plastic will get hot by high intensity extrusion friction,and will plasticizing mildly after the mould heating.Finally the blade will cut the granules from the mould.

Advantage of squeezer dryer plastic machine:

1. Low power consumption. Main motor power between 90kw, no need to connection drying pipe system. Compare transitional horizontal dewatering machine+drying pipe system, can save power 40-50%

2. Small land occupied

3. Low rotation speed, almost no noise.

4. Dewatering function is better, final products humidity less then 3%

5. After squeeze dry granulating machine, the material can put into granulator driectly, do not need the forced feeding machine.

6. Mechanical squeeze dewatering,compared with the original hot air drying, do not need use dewatering machine, drying system and the agglomerator machine,it can save the energy greatly.

Plastic Film Dewatering Drying Machine,dewatering plasticplastic dewater machine,dry plastic dewatering machine

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarsmachinery.com