As the Ministry of Industry and Information Technology leads the pilot projects of smart manufacturing everywhere, and other smart manufacturing policies are effectively driven, China's smart manufacturing industry is not far from the “formation of the surfaceâ€.
The Chinese economy has entered a new normal, vigorously promote structural reforms, and strive to cultivate new kinetic energy has become a new idea for economic development. Since the beginning of this year, a number of China’s industrial promotion policies have been gradually launched, resulting in the rapid development of a large number of new industries, new technologies, and new forms of business, and it is expected to gradually become the pillar of China’s economic development. Combining this April with the "Smart Manufacturing Pilot Demonstration 2016 Special Action Implementation Plan" issued by the Ministry of Industry and Information Technology, smart manufacturing has ushered in a policy-intensive period.
robot:
In order to implement the “Made in China 2025†robot as the overall deployment of key development areas, and for the characteristics of rapid development of China’s robotic industry, large market, weak business, and lack of system, we have conducted field research, organized corporate discussions, and sought industry and local government management. Based on departmental opinions and expert argumentation, the Ministry of Industry and Information Technology, the Development and Reform Commission, and the Ministry of Finance jointly issued the "Robotic Industry Development Plan (2016-2020)" to guide the rapid and healthy development of China's robotics industry. .
Drone:
Although there are still many restrictions on the use of UAVs, the introduction of low-level flight management policies and the establishment of industry standards are the general trend in the next few years. Since August 2010, the State Council and the Central Military Commission issued the "Opinions on Deepening the Management Reform of China's Low-altitude Airspace", which opened the prelude to the full development of low-altitude resources and promoted the development of navigation. In 2014, the National Low Altitude Airspace Management Reform Conference organized by the State Council and the Central Military Commission Air Traffic Control Committee (hereinafter referred to as the “National Air Management Committeeâ€) will open low-level air traffic control. From the perspective of trends, the low-altitude release in 2016 is expected to break through. Low-altitude control is an important policy limit for the application of drones and the expansion of the industry. With the reforms entering a substantive operational phase, the drone industry has ushered in new opportunities for strategic development.
new energy vehicles:
The Development and Reform Commission has formulated the “Measures for the Management of New Energy Vehicle Carbon Quotas (Draft for Soliciting Opinions)â€, setting the ratio of production and sales of new energy vehicles to fuel vehicle scale enterprises and converting them into carbon quotas in the national carbon trading market. At the same time, the Ministry of Industry and Information Technology released the revised draft of the “Regulations on the Management of New Energy Vehicle Production Enterprises and Product Access†to re-delineate the scope of new energy vehicles, improve the access threshold for enterprises, and strengthen product safety monitoring. Sudden increase in policies will push forward the development of new energy vehicles into the "2.0 era." The theme of investment in the new energy automotive industry chain is expected to re-emerge after a period of silence.
Energy equipment:
The National Development and Reform Commission, the Ministry of Industry and Information Technology, and the National Energy Administration issued the "Made in China 2025—Energy Equipment Implementation Plan," which has identified the coal's green intelligent mining and washing equipment in three areas: ensuring energy security, promoting clean energy development, and using clean and highly efficient fossil energy. The development tasks in 15 areas, such as oil and gas storage and transportation, and transportation equipment, and clear five major safeguards such as financial support, tax incentives, and encouragement of international cooperation. The "Proposal" proposes that by 2020, in order to promote the overall deployment of the energy revolution, breakthroughs will be made in breakthroughs in a number of key technologies for clean, low-carbon and safe and efficient development of energy, demonstration applications, and restrictive or bottlenecked equipment and components for mass production and application. Effectively guaranteeing the supply of energy security and boosting the revolution in energy production and consumption.
3D printing:
The Department of Equipment and Industry of the Ministry of Industry and Information Technology organized a symposium on the development of additive manufacturing (also known as “3D printingâ€) in Beijing. At the meeting, the Ministry of Industry and Information Technology said that it will speed up the establishment of an additive manufacturing management system and actively promote key technologies for additive manufacturing. And equipment R&D, vigorously promote the integration of additive manufacturing technology with traditional industries, carry out demonstration applications, expand service areas, and comprehensively promote the development of additive manufacturing industries.
Big Data:
At the State Council policy briefing, the State Council Executive Meeting reviewed and adopted the “Guidance Opinions on Promoting and Regulating the Development of Health-care Big Data Applications,†which lays a solid foundation for application, comprehensively deepens application, standardizes, and promotes “Internet health care†services. Four aspects, including the establishment of a unified and authoritative, inter-connected population health information platform, integration of medical big data resources, development of smart and healthy medical services for the convenience of the people, and the formulation of laws and regulations and standards, were implemented in four areas, including the strengthening of the protection system. By 2020, a nationwide application platform for medical and health information grading and opening will be established to basically establish a development model for the application of health care big data that suits the national conditions, and a health care big data industry system will be initially formed.
VR:
The Institute of Electronic Technology Standardization of the Ministry of Industry and Information Technology released “White Paper 5.0 of Virtual Reality Industry Development†and called on the country to start research on virtual reality as soon as possible, establish a standard system, and regulate the development of the industry. At the same time, it also put forward three policy recommendations for the development of virtual reality, namely, to do top-level design, formulate a road map for industrial planning, establish and improve the relevant standards system; financial subsidies to support industrial applications and technological breakthroughs, especially to strengthen the application of key areas of application Strengthen culture and brand building. The publication of the "White Paper" reflects the country's emphasis on virtual reality technology. It also indicates that the industry will accelerate the development of unified standards, which will help improve virtual reality technology, promote industry standardization and rapid development, and stir up virtual reality in the domestic market. The era of money will end.
As the Ministry of Industry and Information Technology leads the pilot projects of smart manufacturing everywhere, and other smart manufacturing policies are effectively driven, China's smart manufacturing industry is not far from the “formation of the surfaceâ€.
The Chinese economy has entered a new normal, vigorously promote structural reforms, and strive to cultivate new kinetic energy has become a new idea for economic development. Since the beginning of this year, a number of China’s industrial promotion policies have been gradually launched, resulting in the rapid development of a large number of new industries, new technologies, and new forms of business, and it is expected to gradually become the pillar of China’s economic development. Combining this April with the "Smart Manufacturing Pilot Demonstration 2016 Special Action Implementation Plan" issued by the Ministry of Industry and Information Technology, smart manufacturing has ushered in a policy-intensive period.
robot:
In order to implement the “Made in China 2025†robot as the overall deployment of key development areas, and for the characteristics of rapid development of China’s robotic industry, large market, weak business, and lack of system, we have conducted field research, organized corporate discussions, and sought industry and local government management. Based on departmental opinions and expert argumentation, the Ministry of Industry and Information Technology, the Development and Reform Commission, and the Ministry of Finance jointly issued the "Robotic Industry Development Plan (2016-2020)" to guide the rapid and healthy development of China's robotics industry. .
Drone:
Although there are still many restrictions on the use of UAVs, the introduction of low-level flight management policies and the establishment of industry standards are the general trend in the next few years. Since August 2010, the State Council and the Central Military Commission issued the "Opinions on Deepening the Management Reform of China's Low-altitude Airspace", which opened the prelude to the full development of low-altitude resources and promoted the development of navigation. In 2014, the National Low Altitude Airspace Management Reform Conference organized by the State Council and the Central Military Commission Air Traffic Control Committee (hereinafter referred to as the “National Air Management Committeeâ€) will open low-level air traffic control. From the perspective of trends, the low-altitude release in 2016 is expected to break through. Low-altitude control is an important policy limit for the application of drones and the expansion of the industry. With the reforms entering a substantive operational phase, the drone industry has ushered in new opportunities for strategic development.
new energy vehicles:
The Development and Reform Commission has formulated the “Measures for the Management of New Energy Vehicle Carbon Quotas (Draft for Soliciting Opinions)â€, setting the ratio of production and sales of new energy vehicles to fuel vehicle scale enterprises and converting them into carbon quotas in the national carbon trading market. At the same time, the Ministry of Industry and Information Technology released the revised draft of the “Regulations on the Management of New Energy Vehicle Production Enterprises and Product Access†to re-delineate the scope of new energy vehicles, improve the access threshold for enterprises, and strengthen product safety monitoring. Sudden increase in policies will push forward the development of new energy vehicles into the "2.0 era." The theme of investment in the new energy automotive industry chain is expected to re-emerge after a period of silence.
Energy equipment:
The National Development and Reform Commission, the Ministry of Industry and Information Technology, and the National Energy Administration issued the "Made in China 2025—Energy Equipment Implementation Plan," which has identified the coal's green intelligent mining and washing equipment in three areas: ensuring energy security, promoting clean energy development, and using clean and highly efficient fossil energy. The development tasks in 15 areas, such as oil and gas storage and transportation, and transportation equipment, and clear five major safeguards such as financial support, tax incentives, and encouragement of international cooperation. The "Proposal" proposes that by 2020, in order to promote the overall deployment of the energy revolution, breakthroughs will be made in breakthroughs in a number of key technologies for clean, low-carbon and safe and efficient development of energy, demonstration applications, and restrictive or bottlenecked equipment and components for mass production and application. Effectively guaranteeing the supply of energy security and boosting the revolution in energy production and consumption.
3D printing:
The Department of Equipment and Industry of the Ministry of Industry and Information Technology organized a symposium on the development of additive manufacturing (also known as “3D printingâ€) in Beijing. At the meeting, the Ministry of Industry and Information Technology said that it will speed up the establishment of an additive manufacturing management system and actively promote key technologies for additive manufacturing. And equipment R&D, vigorously promote the integration of additive manufacturing technology with traditional industries, carry out demonstration applications, expand service areas, and comprehensively promote the development of additive manufacturing industries.
Big Data:
At the State Council policy briefing, the State Council Executive Meeting reviewed and adopted the “Guidance Opinions on Promoting and Regulating the Development of Health-care Big Data Applications,†which lays a solid foundation for application, comprehensively deepens application, standardizes, and promotes “Internet health care†services. Four aspects, including the establishment of a unified and authoritative, inter-connected population health information platform, integration of medical big data resources, development of smart and healthy medical services for the convenience of the people, and the formulation of laws and regulations and standards, were implemented in four areas, including the strengthening of the protection system. By 2020, a nationwide application platform for medical and health information grading and opening will be established to basically establish a development model for the application of health care big data that suits the national conditions, and a health care big data industry system will be initially formed.
VR:
The Institute of Electronic Technology Standardization of the Ministry of Industry and Information Technology released “White Paper 5.0 of Virtual Reality Industry Development†and called on the country to start research on virtual reality as soon as possible, establish a standard system, and regulate the development of the industry. At the same time, it also put forward three policy recommendations for the development of virtual reality, namely, to do top-level design, formulate a road map for industrial planning, establish and improve the relevant standards system; financial subsidies to support industrial applications and technological breakthroughs, especially to strengthen the application of key areas of application Strengthen culture and brand building. The publication of the "White Paper" reflects the country's emphasis on virtual reality technology. It also indicates that the industry will accelerate the development of unified standards, which will help improve virtual reality technology, promote industry standardization and rapid development, and stir up virtual reality in the domestic market. The era of money will end.
As the Ministry of Industry and Information Technology leads the pilot projects of smart manufacturing everywhere, and other smart manufacturing policies are effectively driven, China's smart manufacturing industry is not far from the “formation of the surfaceâ€.
Silicone Keychain/Key ring introduction:
Do you have many keys on hand ?For household ,for office ,for cars to lock and open?Definately ,everybody has keys! To keep our keys in order ,we will need to buy a keychain ,to make our life more colorful and interesting ,maybe if there is some cartoon images will be very funny,our company help you to do silicone keychains by your own design and assemble with stainless rings,this make your keys more flexible and the ring can avoid being rust!
Silicone Keychain/Key ring description:
1.Product name:Silicone keychain,custom silicone keychains,customized 3d silicone keyring,keyring silicone,silicone rubber keychain,keychain silicone
2.Place of origin:Guangdong China
3.Color:any pantone color is available
4.Logo:printing,debossed,embossed .
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:Gifts/collecting keys
10.Some Silicone Keychain/key ring photos for ref.
Silicone Key Chain,Custom Silicone Keychain,Keychain Silicone,3D Silicone Keychain,Silicone Keyring
Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconekitchenware.com