Certification: ISO 9001:2000, ISO 9001:2008
Trademark: AT&M
Transport Package: Box and Pallet
Origin: China
Certification: ISO 9001:2000, ISO 9001:2008
Trademark: AT&M
Transport Package: Box and Pallet
Origin: China
CISRI Metal Injection Molding (MIM) plant has the capabilities to achieve an annual production of 300 tons of MIM products of different alloy powders, Annual output extends to 120 million pieces. Now we can research and develop many kinds of alloys and various new products to meet the demand of precision parts for many industries. It 's honored to be the certified supplier for more than ten renowned companies around the world. With 90% of the products exported to Japan, USA and Europe.Main product series:
W, Mo, tungsten alloy products; Tool steel products; SUS316L, SUS440C, and 17-4pH stainless steel products; Low alloy steel products; Super-alloy and heat resistant alloy products; Titanium alloy products
Metal Injection Molding (MIM) advantage:
1. Directly manufacturing small sized part (0.1-200g) with complicated geometric shapes
2. The parts tolerance can be held to +/-0.1~0.5%, glabrous surface, up to Ra3.2.
3. The parts made by Metal Injection Molding (MIM) have high relative density (95%-99%),
4. More consistent microstructure and higher mechanical property.
5. High efficency and economic solution for mass production in high volume.
6. Extensive processing for many materials
| Parameters | Investment casting | MIM |
| Minimum aperture diameter | 2mm | 0.4mm |
| Maximum depth of aperture Φ 2mm | 2mm | 20mm |
| Minimum wall thickness | 2mm | < 1mm |
| Maximum wall thickness | unlimited | 10mm |
| Φ 4mm tolerance | ± 0.2mm | ± 0.06mm |
| Surface finish(Ra) | 5μm | 1μm |
| Items | The best | Mill run |
| Angle | ± 0.5 º | ± 2 º |
| Density | ± 0.2% | ± 1% |
| Dimension | ± 0.1% | ± 0.3% |
| Roughness | Ra ∠1μ m | Ra∠5μm |
| Weight | ± 0.1% | ± 0.4% |
| MIM material | Density 103kg /m3 | Hardness | Tensile strength | Elongation% | |
| Iron-based alloy | PIM4600 | 7.68 | 85HRB | 400 | 25 |
| PIM4650 | 7.68 | 100HRB | 600 | 15 | |
| Stainless steel | 316L | 7.94 | 52HRB | 580 | 45 |
| Tungsten alloy | 95%W | 18.1 | HRC31 | 930 | 10 |
| 97%W | 18.5 | HRC33 | 890 | 6 | |
| Carbide alloy | YG8X | 14.9 | HRA90 | Â | Â |
Medical, Automotive, IT, Mechanical, Consumer applications
| Materials | Density | Rockwell Hardness | Tensile Strength | Elongation | |
| g/cm3 | Rockwell | MPa | % | ||
|
Iron-base alloy |
MIM-2200(S) | 7.65 | 45HRB | 290 | 40 |
| MIM-2200(HT) | 7.65 | 50HRC | 380 | 20 | |
| MIM-2700(S) | 7.65 | 69HRB | 440 | 26 | |
| MIM-2700(Carbonitriding) | 7.65 | 55HRC | 830 | 9 | |
| MIM-4650(S) | 7.55 | 90HRB | 700 | 11 | |
| MIM-4650(HT) | 7.55 | 48HRC | 1655 | 2 | |
| MIM-8620(S) | 7.5 | 85HRB | 445 | 20 | |
| MIM-8650(HT) | 7.5 | 35HRC | 800-1300 | 5-9 | |
|
Stainless Steel |
MIM-316L(S) | 7.8 | 67HRB | 520 | 50 |
| MIM-304L(S) | 7.75 | 60HRB | 500 | 70 | |
| MIM-17-4PH(S) | 7.6 | 30HRC | 900 | 6 | |
| MIM-17-4PH(HT) | 7.6 | 40HRC | 1185 | 5 | |
| MIM-440C(S) | 7.5 | 45HRC | 700 | 15 | |
| MIM-430(S) | 7.5 | 65HRB | 410 | 25 | |
| MIM-420 (HT) | 7.25 | 45HRC | 900 | 6 | |
| MIM-410(HT) | 7.25 | 40HRC | 900 | 7 | |
|
Tool steel |
M2(S) | 7.9 | 60HRC |
 |
 |
| M2(S) | 7.9 | 63HRC |
 |
 |
|
| S7(S) | 7.2 | 45HRC | 1550 | 3 | |
| S7(HT) | 7.2 | 59HRC | 1850 | 2 | |
| Soft magnetic alloy | FeSi3 | 7.5 |
 |
 |
 |
| Tungsten alloy | 95%W-Ni-Fe | 18.1 | 30 | 960 | 25 |
| 97%W-Ni-Fe | 18.5 | 33 | 940 | 15 | |
| Hard metal alloy | YG8X | 14.9 | HRA90 | Banged Strength 2300 |
 |
Main product series:
W, Mo, tungsten alloy products; Tool steel products; SUS316L, SUS440C, and 17-4pH stainless steel products; Low alloy steel products; Super-alloy and heat resistant alloy products; Titanium alloy products
Metal Injection Molding (MIM) advantage:
1. Directly manufacturing small sized part (0.1-200g) with complicated geometric shapes
2. The parts tolerance can be held to +/-0.1~0.5%, glabrous surface, up to Ra3.2.
3. The parts made by Metal Injection Molding (MIM) have high relative density (95%-99%),
4. More consistent microstructure and higher mechanical property.
5. High efficency and economic solution for mass production in high volume.
6. Extensive processing for many materials
| Parameters | Investment casting | MIM |
| Minimum aperture diameter | 2mm | 0.4mm |
| Maximum depth of aperture Φ 2mm | 2mm | 20mm |
| Minimum wall thickness | 2mm | < 1mm |
| Maximum wall thickness | unlimited | 10mm |
| Φ 4mm tolerance | ± 0.2mm | ± 0.06mm |
| Surface finish(Ra) | 5μm | 1μm |
| Items | The best | Mill run |
| Angle | ± 0.5 º | ± 2 º |
| Density | ± 0.2% | ± 1% |
| Dimension | ± 0.1% | ± 0.3% |
| Roughness | Ra ∠1μ m | Ra∠5μm |
| Weight | ± 0.1% | ± 0.4% |
| MIM material | Density 103kg /m3 | Hardness | Tensile strength | Elongation% | |
| Iron-based alloy | PIM4600 | 7.68 | 85HRB | 400 | 25 |
| PIM4650 | 7.68 | 100HRB | 600 | 15 | |
| Stainless steel | 316L | 7.94 | 52HRB | 580 | 45 |
| Tungsten alloy | 95%W | 18.1 | HRC31 | 930 | 10 |
| 97%W | 18.5 | HRC33 | 890 | 6 | |
| Carbide alloy | YG8X | 14.9 | HRA90 | Â | Â |
Medical, Automotive, IT, Mechanical, Consumer applications
| Materials | Density | Rockwell Hardness | Tensile Strength | Elongation | |
| g/cm3 | Rockwell | MPa | % | ||
|
Iron-base alloy |
MIM-2200(S) | 7.65 | 45HRB | 290 | 40 |
| MIM-2200(HT) | 7.65 | 50HRC | 380 | 20 | |
| MIM-2700(S) | 7.65 | 69HRB | 440 | 26 | |
| MIM-2700(Carbonitriding) | 7.65 | 55HRC | 830 | 9 | |
| MIM-4650(S) | 7.55 | 90HRB | 700 | 11 | |
| MIM-4650(HT) | 7.55 | 48HRC | 1655 | 2 | |
| MIM-8620(S) | 7.5 | 85HRB | 445 | 20 | |
| MIM-8650(HT) | 7.5 | 35HRC | 800-1300 | 5-9 | |
|
Stainless Steel |
MIM-316L(S) | 7.8 | 67HRB | 520 | 50 |
| MIM-304L(S) | 7.75 | 60HRB | 500 | 70 | |
| MIM-17-4PH(S) | 7.6 | 30HRC | 900 | 6 | |
| MIM-17-4PH(HT) | 7.6 | 40HRC | 1185 | 5 | |
| MIM-440C(S) | 7.5 | 45HRC | 700 | 15 | |
| MIM-430(S) | 7.5 | 65HRB | 410 | 25 | |
| MIM-420 (HT) | 7.25 | 45HRC | 900 | 6 | |
| MIM-410(HT) | 7.25 | 40HRC | 900 | 7 | |
|
Tool steel |
M2(S) | 7.9 | 60HRC |
 |
 |
| M2(S) | 7.9 | 63HRC |
 |
 |
|
| S7(S) | 7.2 | 45HRC | 1550 | 3 | |
| S7(HT) | 7.2 | 59HRC | 1850 | 2 | |
| Soft magnetic alloy | FeSi3 | 7.5 |
 |
 |
 |
| Tungsten alloy | 95%W-Ni-Fe | 18.1 | 30 | 960 | 25 |
| 97%W-Ni-Fe | 18.5 | 33 | 940 | 15 | |
| Hard metal alloy | YG8X | 14.9 | HRA90 | Banged Strength 2300 |
 |
Three-dimensional Movement Mixer
Due to the multi-directional movement of the mixing barrel, the SYH series three-dimensional motion Mixer makes the material in the barrel have many cross mixing points, high mixing effect, uniformity up to 99.9%, and the maximum loading factor can reach 0.9 (common mixer is 0.4 ~0.6), short mixing time and high efficiency. The mixing barrel of this machine has a unique design, the inner wall of the barrel is finely polished, there is no dead angle, no material pollution, convenient discharge, easy cleaning and simple operation.
Three-Dimensional Movement Mixer,Three-Dimensional Motion Mixer Machine,Industrial Mixer,3D Powder Mixing Machine
Griffin Technology Manufacturing Co., Ltd. , https://www.griffindryingeqpt.com