Suitable for offshore platform fire-fighting, thermal dissipation, seawater desalinization, seawater lifting, coastal square fountain, mariculture and attemperation as ground source heat pump in coastal area.
Technical parameter of Vertical Multistage Stainless Steel Sea Water Submersible Electric Pump 12"
Outlet diameter: 200mm(8").Â
Bolt quantity of outlet: 12, type 16×60(8.8), bolts center distance:256mm.
In order to install easily, we particularly have equipped with a matching flange (outer diameter 282mm, inter diameter 220mm, thickness:20mm) consistent to the outlet.
Medium range of Vertical Multistage Stainless Steel Sea Water Submersible Electric Pump 12"
1. All kinds of seawater, alkaline corrosive water, clean water, cold water, rainwater, gushing water of mining, drinking water, etc.
2. Water temperature: +5ºC--+100ºC
3. Solid content (mass ratio): ≤0.01%
4. The full set must be submerged into water completely in vertical position.
Motor Parameter of Vertical Multistage Stainless Steel Sea Water Submersible Electric Pump 12"
The submersible motor is lubricated by clean water. It must be filled with clean water, or else its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power source of Vertical Multistage Stainless Steel Sea Water Submersible Electric Pump 12"
Rated voltage: 380V/415V/460V/6KV/10KV. Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.
Materials of Vertical Multistage Stainless Steel Sea Water Submersible Electric Pump 12"
Impeller:bronze, SS304/316/316L, etc
Pump bowl: bronze, SS304/316/316L, etc
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13 (1050ºC thermal refining, enhancen torsional moment)
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages of Sea Water Submersible Pump for Offshore Rig Cooling System 10"
1. Easy installation
2. Low noise, multistage
3. Built-in check valve avoiding water hammer impact.
4. High head with single stage, strong stability, the shaft diameter φ28mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we have attached with imported hard bearing liner.
Supplys scope
Submersible pump unit (including the body and motor), built-in check valve, 1 flange matching with outlet, 8 bolts M12×55, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.
Friendly reminder:Â
For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
1. All kinds of lifting pipes including high-frequency welded pipes (dia.25mm-500mm); Connection type: flange connection, screw connection and clamp connection. They are made accurately by machine tools.
2. Pipe clamp: the length is 50mm-500mm (we can produce the other different spans according to your requirements).
3. Wellhead devices: return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; the cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers.)
4. Desander: avoiding blocking and polluting by sand in water. And it contributes to long service life.
5. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
6. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.
Â
As raw material for organic solvent, spray paint, artificial leather and spices.
A quick drying solvent for nitrocellulose and cellulose acetate; used in paints and coatings. It is also used in the manufacture of artificial leather and spices and as an extractant for oils and fats. Or the raw material for making dyes and drugs.
with most organic solvents
with a wide range of solubility, dissolved acrylic, vinyl, nitro cellulose epoxy, polyurethane, polyester, phenolic resin
than the acetone has a higher flash point and higher control performance, can better meet coating, paint formulation and process the user's requirements
in the process of formulation requires the use of low boiling point volatile organic solvent, the application can replace acetate and acetone, butanone
the material can replace polyurethane cyclopentane as foaming agent, such as HCFCs, environmental protection
the use of environmental friendly solvents, not harmful
Methyl Acetate,99.95% Methyl Acetate,Foaming Agent,Coating Methyl Ethanoate
SHANDONG S-SAILING CHEMICAL CO,LTD , https://www.sdqh-chem.com