DIN ANSI JIS Bsw Carbon Steel Hex Nut

Galvanized Carbon steel DIN934 Hex Nut
Size: M5 to M36 (more sizes available upon order)
Class/Grade: 5, 8, 10
Surface: PL, ZP, YZP, BZP, HDG, bronze
Standard: DIN/ANSI/JIS/BS/IFI
Online catalogue and specifications hexnuts. cn

1. Metric Sizes Regular Supply M5, M6, M8 up to M36
2. Other size M4 and below, or M42 and above MOQ required
3. As per DIN934 standard dimensions
4. Class 5, Class 8, Class 10
5. Standard or fine threaded
6. ANSI B18.2. 2 Inch Size hex nut
Grade 2, Grade 5, grade 8 
UNC and UNF
7. Standard hex nut, hex jam nut, 
8. Heavy hex nut, heavy hex jam nut
9. ASTM A194 2H, 4, 8, 8HM hex nut
10. Regular Size Supply from 3/16 to 1-1/2 inch as per
11. ANSI B18.2. 2 standard dimensions
12. Other specifications MOQ required! 
Surface Treatment Options: 
Plain, Black, ZP, YZP, BZP, HDG, 
Nickle, Chrome, Dacromet, Cr3+, Cr6+
Other Material Options for hex nut: 
Stainless Steel SS201, SS301, SS304, SS316
Grade A2-70. A4-80


  Galvanized Carbon steel DIN934 Hex Nut
Size: M5 to M36 (more sizes available upon order)
Class/Grade: 5, 8, 10
Surface: PL, ZP, YZP, BZP, HDG, bronze
Standard: DIN/ANSI/JIS/BS/IFI
Online catalogue and specifications hexnuts. cn

1. Metric Sizes Regular Supply M5, M6, M8 up to M36
2. Other size M4 and below, or M42 and above MOQ required
3. As per DIN934 standard dimensions
4. Class 5, Class 8, Class 10
5. Standard or fine threaded
6. ANSI B18.2. 2 Inch Size hex nut
Grade 2, Grade 5, grade 8 
UNC and UNF
7. Standard hex nut, hex jam nut, 
8. Heavy hex nut, heavy hex jam nut
9. ASTM A194 2H, 4, 8, 8HM hex nut
10. Regular Size Supply from 3/16 to 1-1/2 inch as per
11. ANSI B18.2. 2 standard dimensions
12. Other specifications MOQ required! 
Surface Treatment Options: 
Plain, Black, ZP, YZP, BZP, HDG, 
Nickle, Chrome, Dacromet, Cr3+, Cr6+
Other Material Options for hex nut: 
Stainless Steel SS201, SS301, SS304, SS316
Grade A2-70. A4-80


 

Nox Sensor 24V For VOLVO Car

Nox Sensor 24V for Volvo car, Automobile engine parts Volvo car 24V Nox sensor is applicable to Volvo tail gas treatment.

Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.

The effects of Nox sensor damage are as follows:

1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.

2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.

3. The damage of nitrogen and Oxygen Sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on.

Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.

Nox Sensor 24V For VOLVO Car,Volvo Automobile 24V Nox Sensor,Volvo Accessories 24V Nox Sensor ,Volvo Automobile Sensor 24V Nox Sensor

Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com