According to Battery.com.cn, in order to facilitate the use, many citizens will always plug the charger into the power socket, even if it is not charged, it does not disconnect the power supply. Professionals remind that this method consumes electricity and easily shortens the charger. Life expectancy also has potential safety hazards.
phone charging
"When not charging, will your charger continue to be connected to the power supply, or will it be unplugged?" Recently, the reporter interviewed 25 people, and only 11 of them said that they would pull it out after using the charger. The other 14 people said that in order to be easy to use, their mobile phones and computer chargers have been plugged into the socket. "My mobile phone consumes a lot of power and charges almost every day. The charger is always connected to the power supply." Miss is a corporate salesperson. She uses a lot of mobile phones on weekdays. She told reporters that at home, she usually plugs the mobile phone charger into the outlet. When charging, she will connect the mobile phone. After charging, she will remove the mobile phone directly. The charger and socket are rarely disconnected. For your laptop charger, in addition to carrying out, most of the time is basically not connected to the patch panel. Miss Su told reporters that many of her friends are like this.
"This is actually a bad habit." In the interview, Master Zhan, who has many years of experience in mobile phone repair, told reporters that the charger connected to the socket does not seem to be connected to the mobile phone. In fact, it is still in working condition, or it will consume power. Although the power consumption is not much, generally only a few hundred milliwatts, but it is also a waste. " Moreover, the long-term disconnection of the charger will not only shorten the service life of the charger, but also have potential safety hazards such as accidental electric shock, especially inferior chargers produced by some informal manufacturers, which may cause a short circuit due to heat. Therefore, Master Zhan believes that whether it is from the use of electricity or the safety of electrical appliances, after the use of mobile phones, computers, etc., or after charging, it is best to disconnect from the power supply.
Wire Products generally includes Nails wire, Reinforcing wire, U type wire, Stainless steel wire, Black Annealed Wire, Galvanized Wire, PVC Coated Steel Wire And so on a series of products.
Nails wire also known as hard drawn wire, finds most in uses in nail making or weaving of wire mesh products.
Reinforcing wire usually uses for producing reinforcing wire mesh. It can be in coils or cut as 6m length.
U type wire material is low carton steel, Q235 or Q195.
Stainless steel wire uses for weaving of wire mesh, drawing of wire, in manufacturing of tie wire, nails and other metal products.
Black Iron Wire is made of high quality low carbon steel wire rod Q195 or Q235. The soft black iron wire comes into the form of coil wire, spool wire, U type wire or cut wire.
Galvanized Wire can be supplied in the form of coil wire, bobbins wire, spool wire, cut wire .
PVC Coated Steel Wire is the most popular plastic for coating wires as it is relatively low in cost, resilient, fire retardant and possesses good insulating properties. Its widely used in animal breeding, forestry protection, aquaculture, park and zoo Fence, the stadium, also used in other applications such as coat hangers and handles.
Wire Products,Galvanized Iron Wire,,Aluminum Wire,stainless steel wire, black steel wire
Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com