1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling: rotating bearings, roller bearings, all gears, moving bearings, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3, pay attention to whether the work of all parts of the machine is normal
4, pay attention to check the wear level of the wear parts, and always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately and eliminated.
Square Pump,Square Cast Iron Pump,Cast Iron Square Pump,Square Water Pump
Bin-Bridge General Machinery Co.,Ltd , https://www.castingpump.com