The purpose of mixing is three: first, the various materials prepared by the ingredients and the later returned ore are mixed to obtain a sintered ore having uniform quality; secondly, the moisture necessary for adding the sintering material during the mixing process is made. The sinter is wetted by water, and thirdly, spheroidizing of the sinter is performed to improve the gas permeability of the sinter. In short, a sintered material having a uniform chemical composition, a suitable particle size, and good gas permeability is obtained by mixing.
In order to achieve the above object, the raw materials are mixed twice. The primary mixing is mainly to mix the sinter and act as a preheating sinter. The secondary mixing mainly consists of spherizing and adding water to the wetted and mixed sinter. China's sinter plants use two mixing processes.
In order to achieve the above object, the raw materials are mixed twice. The primary mixing is mainly to mix the sinter and act as a preheating sinter. The secondary mixing mainly consists of spherizing and adding water to the wetted and mixed sinter. China's sinter plants use two mixing processes.
Fabric Finishing Agent,Chlorine Sdic,Sodium Dichloroisocyanurate,Sodium Dichloroisocyanurate Disinfectant
Henan Kepeiao New Materials Co.,Ltd. , https://www.kopeochem.com