After heavy rain, there will certainly be a lot of water in the potholes on the road. Even drivers with rich experience may not be able to avoid it all. Then how can a driver drive on the road to protect his car from “torture�
First: Drivers should slow down and observe themselves
When the driver saw the potholes in the road, he should stop and watch the car to see which part of the car was in the water. If the water is not deep, you should keep it at a low speed and you can't step on the accelerator to speed up the speed. Otherwise, the mud splashed by too fast speed may affect the sight of the rear car; if the accumulated water is already faster than half of the tire, you should bypass it. But you can't hard drive past, otherwise this will cause the car to malfunction as much as possible.
Second: If the car is passively extinguished in the stagnant water, remember that you cannot start the car again and drive it in again.
Some drivers may not observe it so carefully that they will enter the stagnant office. Then the car may turn off. If the car is passively extinguished at a stagnant water, it is highly likely that the car's engine is flooded. At this time, you can't hard drive the car and you should call the trailer company to tow it away. If the engine is broken, the engine can only be sent to a repair shop for major repairs.
Third: When cars pass by where there is little water, they should promptly eliminate water
Excluding moisture is to exclude the moisture of the brake pads in the vehicle. If it is not discharged in time, the water on the brake pads will affect the sensitivity of the brakes and may cause serious traffic accidents. The way to remove the water is to slow down the speed and then step on the accelerator and the brakes. Note that it should be stepped on at the same time. In this way, the moisture of the brake pad can be quickly discharged.
The above is what the car should do after passing through the water in the road to ensure that the parts of the car are not damaged and provide the driver with a safe driving process. This requires the driver to pay special attention to the stagnant water on the road after the rainy weather. If it is too much, then he should choose to bypass the road. The car should pay attention to the usual maintenance, if this small problem is not the case, it is sure that the car will be a big problem.
The CNC Turning process is a digital manufacturing process that is implemented by computer numerically controlled (CNC) machines. This process is used to produce parts with complex shapes, and the manufacturing process involves multiple steps. The following are the detailed steps of the general CNC Turning process:Design: First, you need to design a CAD model of the parts you want to produce. A CAD model is a three-dimensional image created using computer-aided design software that can describe the shape, size, and features of a part.Programming: Next, you need to convert the CAD model into G-code, which is a type of computer instruction that controls the movement and operation of the CNC machine. G Code can be written manually or generated automatically using CAM software.Prepare the machine: Before you start machining, you need to check and prepare the CNC machine. This includes checking the machine's coordinate system, setting tools and cutters, and setting parameters such as the machine's speed and feed speed.Processing: After the machine is ready, the processing can begin. The machining process usually consists of multiple steps, such as roughing, finishing and drilling. At each step, the CNC machine moves tools and workpieces according to instructions in the G code to achieve the desired cutting operation.Inspection: After processing, the parts need to be inspected to ensure that they meet the design requirements and specifications. Inspection can be carried out by using measuring instruments, templates and other testing tools.Polishing and surface treatment: Parts can be polished and surface treated if needed to improve their surface finish and corrosion resistance. This can be done through the use of abrasives, chemicals and other tools.In short, the CNC Turning process is a high-precision, high-efficiency manufacturing process suitable for the production of parts with complex shapes. Through the control of CAD model and G code, the precise control of machine motion can be realized, so as to achieve high-precision parts processing.
Cnc Turning Machine,Machined Metal Parts,Cnc Turning Service,Cnc Turning Parts
Dongguan ganzoo prototype manufacture co.,ltd , https://www.dgpmsheetmetal.com