China Drying Equipment Network Double Cone Rotary Vacuum Dryer is a double-cone rotary tank. When the tank is in a vacuum state, steam or hot water is introduced into the jacket to heat it. The heat is brought into contact with wet materials through the inner wall of the tank. Wet materials The vapor that evaporates after absorbing heat is pumped through a vacuum pump through a vacuum pump. Because the inside of the tank is in a vacuum state, and the rotation of the tank causes the materials to be continuously turned up and down inside and out, the speed of drying of the materials is accelerated, the drying efficiency is improved, and the purpose of uniform drying is achieved.
Double cone rotary vacuum dryer is a mixture - dried in one of the new dryer. The condenser, the vacuum pump and the dryer are matched to form a vacuum drying device. (If you need to recover the solvent, the condenser can not be used) This machine is advanced in design. At the same time, the material also rotates but the material is not accumulated on the container because the container itself rotates the material, so the heat transfer coefficient is high and the drying rate is large, which not only saves energy.
Double Cone Rotary Vacuum Dryer Features:
1. Reasonable design, easy installation and adjustment, and can be adapted to various conditions.
2. With continuous protection device.
3. 30% of Centrifugal Spray Dryer Festival that consumes only the same amount of energy
4. The final moisture of the material can be flexibly controlled
5. Complete the entire drying process in a vacuum cryogenic environment, in line with medical GMP standards, and suitable for heat-sensitive materials.
6. High degree of automation, simple operation, and continuous production.
This machine is suitable for vacuum drying and mixing of powdery granular materials in the pharmaceutical, food, chemical and other industries. It is especially suitable for materials with the following requirements:
1. Heat-sensitive materials that cannot accept high temperatures
2. Easily oxidized, dangerous materials
3. Material to recover solvent and toxic gas
4. Requirements of materials with extremely low residual volatile content
5. The material required for the crystal shape
Two-component polyurethane adhesive (PU Adhesive) is an adhesive containing urethane group (-NHCOO-) or isocyanate group (-NCO) in the molecular chain. It is composed of isocyanate and hydroxyl-containing compounds such as polyester, polyether, castor oil or Other polyols are obtained by reaction. It has excellent performance, strong molecular designability, wide physical properties, and wide application range of bonding. It is one of the important varieties of synthetic adhesives. Two-component polyurethane adhesive is the product with the largest variety, the largest amount and the most widely used in PU. The two components of the product are packaged separately, easy to store, adjustable performance, high adhesive strength, wide application range, good weather resistance and other characteristics, showing unique advantages in the application field.
Two-Component Wooden Door,Wood Laminate Adhesive,Laminate Adhesive Glue,Wood Glue On Laminate
GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com