Waste /Motor/Electrical / Enameled Copper Wire Granulator

Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
scrap copper wire granulator General Introduction 
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobile 
wires, telecommunication wires, and other kinds of copper wires, in order to recover 
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..

scrap copper wire granulator Main Features: 
1.  No water needed, just put cable wires into the plant 
2.  Turnkey and compact type, PLC controller, 
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires

Final Copper&plastic granules output:
Waste /Motor/Electrical / Enameled Copper Wire Granulator

copper separator machine Working Process: 
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
Waste /Motor/Electrical / Enameled Copper Wire Granulator
Waste /Motor/Electrical / Enameled Copper Wire Granulator

 
copper cable granulator Technical Parameters: 
Model  Processing
capacity 		Processed wire dia. Total power Voltage Dimension  Weight 
FC-400-1 80-120kg/h

0.3-20mm 		11.92KW

customized 		1.5*1.5*1.9m 750kg
FC-400 200-250kg/h 23.12KW 2.7*1.9*2.3m 1200kg
FC-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
FC-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
FC-800 600-800kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
FC-1200 1000-1200kg/h 129.6KW 16*10*3m 12000kg

Different Models of scrap wire shredder: 
Waste /Motor/Electrical / Enameled Copper Wire Granulator
Waste /Motor/Electrical / Enameled Copper Wire Granulator
Waste /Motor/Electrical / Enameled Copper Wire Granulator

Contact us freely for more detailed quotation. 
  scrap copper wire granulator General Introduction 
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobile 
wires, telecommunication wires, and other kinds of copper wires, in order to recover 
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..

scrap copper wire granulator Main Features: 
1.  No water needed, just put cable wires into the plant 
2.  Turnkey and compact type, PLC controller, 
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires

Final Copper&plastic granules output:
Waste /Motor/Electrical / Enameled Copper Wire Granulator

copper separator machine Working Process: 
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
Waste /Motor/Electrical / Enameled Copper Wire Granulator
Waste /Motor/Electrical / Enameled Copper Wire Granulator

 
copper cable granulator Technical Parameters: 
Model  Processing
capacity 		Processed wire dia. Total power Voltage Dimension  Weight 
FC-400-1 80-120kg/h

0.3-20mm 		11.92KW

customized 		1.5*1.5*1.9m 750kg
FC-400 200-250kg/h 23.12KW 2.7*1.9*2.3m 1200kg
FC-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
FC-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
FC-800 600-800kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
FC-1200 1000-1200kg/h 129.6KW 16*10*3m 12000kg

Different Models of scrap wire shredder: 
Waste /Motor/Electrical / Enameled Copper Wire Granulator
Waste /Motor/Electrical / Enameled Copper Wire Granulator
Waste /Motor/Electrical / Enameled Copper Wire Granulator

Contact us freely for more detailed quotation. 
 

CNI can supply specialty Optical Fiber for Laser coupling. Our products include single-mode fiber, multi-mode fiber, polarization maintaining fiber, liquid light fiber and fiber with pigtailed GRIN Lens collimators for all our existing laser modules from visible to near IR transmission.


 â—† Fiber for laser coupling

Single-mode fiber/ Fiber combiner
 1 Multimode fiber (SMA05/ FC/ PC connector)

Single-mode fiber for core diameter of 4-9 um. Available for visible wavelengths from 400 up to 860 nm. Fiber splitter available for 532 nm.



Multimode fiber for core diameter of  50 um, 100 um, 200 um, 400 um, 600 um, 800 um, 1000 um. Support more than one propagation mode.
Polarization maintaing fiber
Liquid light fiber
Polarization maintaining fiber is available for wavelengths from 460 nm to 780 nm

Liqud light fiber for cvore diameter od 3mm, 5mm, 8mm, 10mm
Fiber with pigtailed GRIN lens collimators
Fiber with even square beam spot
Diameter 1.8 mm clear aperture. Coupled to standard 62.5/ 200/ 400um fibers.

Even square beam spot is available on request.

 â—† Accessories for laser coupling

Fiber optic collimator                               
 11 Fiber beam combiner

Used to shape the beam after fiber, FC or SMA connector optional.

 Good spot uniformity
 Adjustable focus optional
 Customization available



Designed for combining 4, 3, 2 fiber beam into 1 fiber (single-mode or multimode) output.


Fiber Holder

Threaded hole: M6
Thread hole spacing: 50 mm
Height: 30cm, 60cm optional
Base size: 30cm* 30cm


Fiber line generator
CNI can offer fiber line generator at all existing wavelengths and output power, also the divergence are available in fan angles of 80° to 114°  for customers' applications. These series lasers can be used to display a uniform straight reference line in alignment, Machine Vision Systems, construction and process control.
  • Uniform straight line after fiber
  • No spotlight on both ends of the line
  • Even distribution on vertical direction of the line

Standard Product

Parr No.

Full fan Angle (α°)

Line width at 2m location (mm)

Material

FLG##
 80°, 114°
 7-8
 BK7



Optical Fiber

Optical Fiber,Optical Fiber Cable,Fiber Optic Strands,Optical Fiber Communication

Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.opticsqm.com

This entry was posted in on