Characteristic:
---Using compressed air as primary energy sources
---According with GMP standard
---Solving the stratification of powder and granules
---The filters made of Ti will never be jammed and be abraded
---Eliminate the static electricity
---Made of nontoxic and corrosion resistant materials
---Leakage free capsule, to prevent cross contamination
---Intelligent control and high automation
---Materials are not adhering to the inner surface of the conveyor
---Modular structure, easy to clean and dismantle
---Small and light, easy to install
---Low noise and free from vibration
---Energy saving and low running cost.
QVC conveying system consist of material container, pipeline, vacuum conveyor, control system and so on. The max distance to convey is 30m in height or 90m in length and the max conveying capability can reach 18 t/h.
Technique index:
| Type | QVC-5 |
| Transportation capacity | 6000 (kg/h) |
| Consuming-gas-capacity | 2880 (liter /minute) |
| Air-feed compressive stress | 0.4-0.6 (Mpa) |
| Exterior dimension | 420*1150 (mm) |
Contact:
Looking forward to working with you!
Contact:Â Mr.David Shi
YANGZHOU NUOYA MACHINERY CO., LTD
URL:www.noah-pm.com
TEL: 0086-514-87667998,87667808Â
FAX: 0086-514-87665265
Vacuum Casting is a casting process in which metal is smelted, poured, and crystallized in a vacuum chamber. Vacuum casting can minimize the gas content in the metal and prevent metal oxidation. This method can produce highly demanding special alloy steel castings and highly oxidizable titanium alloy castings. Vacuum casting is expensive, and it is generally used for smelting alloys and high-quality castings with high vapor pressure and easy volatility loss. The mold should not contain volatiles.
Vacuum casting is generally divided into two forms: vacuum suction casting and vacuum die casting.
Vacuum Casting
Vacuum Casting Jewelry,Plastic Rapid Prototype,Vacuum Casting Chamber,Vacuum Casting Metal
Guangdong Shunde Teamwork Model Technology Co., Ltd , https://www.gdtwmx.com