According to Osima, the F8 automatic PVC drawing machine has evolved from the performance of the previous generation of flat woven fabrics and down-printing machine P1 series. It is specially designed for light, thin and viscous fabrics such as PVC and nylon. Designed for fabrics such as cloth, down, lead, and coating. The machine is easy to operate and easy to understand.
Model features
The F8 is a cloth-drawing machine specially designed for adhesive-type fabrics. It features three functions: “single tension, sweeping, and peelingâ€. It also has anti-static and anti-static functions. Not only that, F8 also inherits the superior performance of the n-drawing machine, including no cloth stop, automatic return to fixed point; 5 minutes automatic shutdown when there is no operation; when the emergency stop, the laid fabric will not drag; new PLC touch Features such as a screen operating system, streamlined appearance with reduced wind resistance, reduced noise and vibration.
Smart service
The F8 type cloth drawing machine adopts a liquid crystal touch device, which can realize simple setting of the length, mode, quantity, speed and paragraph data of the cloth, and can select different languages, and the pattern identification is simple and easy to understand. The cutter device and the main body can be easily disassembled and assembled, and the cloth walking distance and the cutting speed can be set according to the width and the cloth property when the cloth is cut. The fuselage is equipped with a “folding deviceâ€, which can be pulled in one direction and back and forth according to the actual needs of the customer. It is also equipped with an automatic “pre-slack†for special stubborn fabrics that can be pre-sanded and then laid to eliminate the tension of the fabric and ensure the quality of the fabric. In addition, F8 adopts “electric eye automatic edge-to-edge†and “cloth tail sensor deviceâ€, which can correctly operate the automatic edge-to-edge and control stop operation during the operation of the cloth, and automatically drive back to the fixed point.
Will debut CISA2007
CISMA, the largest sewing equipment exhibition in China, will be held in Shanghai in September this year. Under the organization of Chairman of the Osima Headquarters Group and Chairman of the Taipei City Needle Car Association, Mr. Deng Jiangrong, 55 Taiwanese manufacturers have already introduced CISMA's "Taiwan Exhibition". The museum was booked out, due to site restrictions, 52 of them were in the W2 pavilion, and the other three were in the E1 and E4 pavilions.
Fischer-Tropsch wax can be used in plastic processing, such as injection molding, extrusion and pelletizing industries. In the production process of masterbatch and modified plastics, Fischer-Tropsch wax contributes to the dispersion of fillers and excellent smoothness during mixing. It can be used as an external lubricant for PVC. The low viscosity can increase the production speed of the product. It helps to disperse the pigments and fillers during mixing. It is especially useful in the extrusion of high-viscosity systems. It is more than ordinary PE WAX. 40-50% less, and can significantly improve the surface gloss of the product. When using intense colors, the melted Fischer-Tropsch wax can effectively wet the dye and reduce the extrusion viscosity.
When used in the ink as a particulate powder, it can improve the wear resistance and wrinkle resistance of the applied material. When applied to the coating, it can have a wrinkling effect, and when used in a micro powder state, it can form a wrinkle effect of stripes and water lines. When powder coating resin is added, it plays a role of lubrication in the extrusion process, which can reduce screw torque, reduce energy consumption and improve production efficiency.
Fischer Tropsch Wax,Fischer Tropsch Wax,Tropsh Wax,Fischer
Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com