KCB stainless steel gear pump features:
KCB stainless steel gear pump gear, shaft, pump body, safety valve , shaft seal (special requirements can be magnetic drive, zero leakage structure) formed. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation.
KCB stainless steel gear pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. The pump has a safety valve as overload protection, safety valve full back pressure of 1.5 times the rated pump exclusion pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline.
From the spindle extension to the pump to see, clockwise rotation.
Whether the pump is fastened by fasteners; whether the valve in and out of the pipe is opened; whether the direction of rotation of the pump meets the requirements; and when the high temperature medium is started, the jog operation should be used for one minute before connecting the work.
KCB stainless steel gear pump maintenance work:
Note KCB stainless steel gear pump pressure should be consistent with technical specifications; Note shaft seal, if leakage occurs, depending on the degree of fine-tuning the screw, do not over-tighten; Do not adjust the safety valve adjustment bolt rod; abnormal noise , Should immediately stop working for inspection.
Membrane Separation Nitrogen Generator
There are 2 kinds of multifunctional laser cutting nitrogen generators we have developed. Both serves as an auxiliary gas supply equipment. One of them is the membrane N2 generators developed to help the client to solve the Pain point issues with the following advantages:
Characteristics:
â—ŽAdopting a fully enclosed refrigeration compressor, super cooling, stable operation, low noise, reliable performance, and long service life;â—ŽThe equipment structure is designed reasonably, easy to maintain, and has a box shaped appearance, which is beautiful and generous;
â—ŽEnlarge the heat transfer area of the evaporator to improve heat transfer efficiency and ensure the stability of the machine's dew point;
â—ŽA specially designed cold and heat exchanger that perfectly utilizes the heat exchange between the outlet cold source and the inlet hot air. To avoid condensation in pipelines and achieve more energy-efficient results.
â—ŽThe high-efficiency gas-water separation device, combined with a well-designed drainage system, is not clogged and comes with a filter that can be cleaned regularly to continuously and stably discharge condensate water from the machine;
Membrane Separation Nitrogen Generator,Membrane N2 Generator for Laser Cutting,Multifunctional Membrane N2 Generator
Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net