High pressure axial piston pumps A4VG180

Brueninghaus Hydromatik Rexroth A4VG pump
 
Hydraulic variable displacement axial pump A4VG40, A4VG56, A4VG71, A4VG90, A4VG125, A4VG180, A4VG250 Series 32
Nominal pressure 400 bar
Peak pressure 450
Control device: NV, HD3, HW, DG, DA1, DA2, EP3, EP4, EZ1, EZ2
 
The A4VG axial piston variable pump in swash plate design for hydrostatic closed circuit transmissions
- Flow is proportional to drive speed and displacement and is infinitely variable
- Output flow increases with the swivel angle of the swash plate from 0 to its maximum value
- Flow direction changes smoothly when the swash plate is moved through the neutral position
- A wide range of highly adaptable control devices is available for different control and regulating functions
- The pump is equipped with two pressure-relief valves on the high pressure ports to protect the hydrostatic transmission (pump and motor) from overload
- The high-pressure relief valves also function as boost valves
- The integrated boost pump acts as a feed and control oil pump
- The maximum boost pressure is limited by a built-in boost pressure relief valve
- The integral pressure cut-off is standard

Technical Data 
Table of values (theoretical values, without efficiency and tolerances; values rounded)