In general, the dried bamboo shoots must undergo multi-layer processing in the process of production, such as shelling, cooking (killing), pressing, drying, packaging, etc. Below we will give a detailed introduction to the drying process of dried bamboo shoots. Drying techniques for dried bamboo shoots are dried and dried.
Drying: Choose sunny days and put the bamboo shoots on the sun mat for the sun. But if you want to turn it over regularly, when it is dried to 90% dry, put it on the board and stratify it in layers. Then cover it with wood and add weight to let it regain moisture and flatten it, then 3-5 days. Dry (during the rainy days, it should be dried to avoid the spoilage of the bamboo shoots)
Drying: There is a steam generator on the market that specializes in drying bamboo shoots. Users can choose the drying steam generator that suits them according to their daily processing capacity. The bamboo shoot drying steam generator can be dried at a low temperature without destroying the molecular structure of the dried bamboo shoots. After drying out, the taste is very good. Dried bamboo shoot drying steam generator can be widely used in chemical, food, medicine, building materials, electronics and other industries, especially suitable for drying of flake, strip and granular materials with good ventilation, for filter cakes and paste materials. It can also be dried by molding after granulator or extrusion mechanism.
PVC Edge Banding For Furniture
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape
Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com