Cutting work includes boring the cutting alley and cutting the patio.
1. Cutting the alleys - along the direction of the ore body at the lower boundary of the stope, and with each ore slippery. Cutting lane width = 2 meters, height = thickness of the seam. The function of cutting the alley is: as the free surface of the collapse; the second is the passage for ventilation and winch and pedestrians.
2, cutting the patio - cutting the patio, also known as cutting up the mountain, generally located on one side of the ore block, it connects the lower ore slipper and the upper safety road. The cutting well is 2 to 2.4 meters wide (requires a width to ensure the required working space for starting the mining). The height of the cutting patio is the thickness of the ore layer.
When the apex shale is relatively broken and the stability is very poor, the cutting and cutting open wells should be left 0.3 to 0.5 meters in advance when used as a protective layer, called the top mine, and then pick it up when it is recovered. .
Mould releasing agent
Release agent is a functional substance between mold and finished product. Release agent has chemical resistance, in contact with the chemical composition of different resins will not be dissolved. Due to the rapid development of injection molding, extrusion, calendering, molding, laminating and other processes, the dosage of release agent is also greatly increased. Our release agent variety, complete specifications, quality assurance!
Release agent is widely used in metal die casting, polyurethane foam and elastomer, glass fiber reinforced plastics, injection thermoplastics, vacuum foam sheet and extruded profiles and other die pressing operations. Sometimes other plastic fillers such as plasticizers leak into the interface during molding, and a surface remover is needed to remove it.
Mold Release,Stripper wax,Mold Release Price,Release agent supplier,Release agent price
Jiangyin Thousands Chemicals Co. , https://www.wqhxcomposite.com