Model NO.: Biteman B-series heated, BTGMXD026-B, 2.6m3/min
Modular Units Desiccant Chamber: Replaceable Factory Filled Desiccant Chamber
Pressure Dew Point: Minus 40 Centigrade Degree
Heat or Heatless: Heat
Trademark: BITEMAN
Transport Package: Wooden Case
Specification: ISO9000, ISO8573.2
Origin: Shenzhen China
BITEMAN Modular units heated desiccant air dryer
Unique features
-Less than 2% purge air with only 0.4kw to 4.4kw power consumption,no auxiliary motor
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccan chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40C (-40F) is ensured
-The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
Details of advantages
Innovative structure with patents,employs small desiccant chamber unit
1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control
Structure and operation
Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration
Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
Technical data
B-series            Heatless        (-40ºC dew point)
Marks
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air≤5%
         Pressure drop≤0.012MP
         Noise≤75dB(average);
Â
B-series            Heatless        (-40ºC dew point)
| MODEL | Port (inch) | Flow rate (m³/min) | Dimension (mm) | ||||
| @5~6bar | @6~7bar | @7~10bar | L | W | H | ||
| BTGMXW065-B | G2 | 4.8 | 5.8 | 6.5 | 451 | 240 | 1628 |
| BTGMXW085-B | G2 | 6 | 7.4 | 8.5 | 560 | 240 | 1628 |
| BTGMXW106-B | G2 | 7.4 | 9.1 | 10.6 | 668 | 240 | 1628 |
| BTGMXW146-B | G2 | 9.8 | 12 | 14.6 | 885 | 240 | 1628 |
| BTGMXW165-B | G2 | 11.6 | 14.2 | 16.5 | 994 | 240 | 1628 |
| BTGMXW206-B | G3 | 14.6 | 17.8 | 20.6 | 763 | 480 | 1628 |
| BTGMXW248-B | G3 | 16.7 | 20.5 | 24.8 | 794 | 480 | 1628 |
| BTGMXW295-B | G3 | 21.5 | 26.3 | 29.5 | 903 | 480 | 1628 |
| BTGMXW336-B | G3 | 24.1 | 29.5 | 33.6 | 1012 | 480 | 1628 |
| BTGMXW385-B | G3 | 26.8 | 32.8 | 38.5 | 1121 | 480 | 1628 |
| BTGMXW425-B | G3 | 29.7 | 36.4 | 42.5 | 1230 | 480 | 1628 |
| BTGMXW465-B | G4 | 32.7 | 40.1 | 46.5 | 1339 | 480 | 1628 |
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air≤5%
         Pressure drop≤0.012MP
         Noise≤75dB(average);
Â
Â
B-series         Heat            (-40ºC dew point)
| MODEL | Port (inch) | Flow rate (m³/min) | Dimension (mm) | Max Power | ||||
| @5~6bar | @6~7bar | @7~10bar | L | W | H | Kw/1 Ph | ||
| BTGMXD065-B | G2 | 4.8 | 5.8 | 6.5 | 451 | 240 | 1628 | 0.8 |
| BTGMXD085-B | G2 | 6 | 7.4 | 8.5 | 560 | 240 | 1628 | 1 |
| BTGMXD106-B | G2 | 7.4 | 9.1 | 10.6 | 668 | 240 | 1628 | 1 |
| BTGMXD146-B | G2 | 9.8 | 12 | 14.6 | 885 | 240 | 1628 | 1.4 |
| BTGMXD165-B | G2 | 11.6 | 14.2 | 16.5 | 994 | 240 | 1628 | 1.6 |
| BTGMXD206-B | G3 | 14.6 | 17.8 | 20.6 | 763 | 480 | 1628 | 2 |
| BTGMXD248-B | G3 | 16.7 | 20.5 | 24.8 | 794 | 480 | 1628 | 2.4 |
| BTGMXD295-B | G3 | 21.5 | 26.3 | 29.5 | 903 | 480 | 1628 | 2.8 |
| BTGMXD336-B | G3 | 24.1 | 29.5 | 33.6 | 1012 | 480 | 1628 | 3.2 |
| BTGMXD385-B | G3 | 26.8 | 32.8 | 38.5 | 1121 | 480 | 1628 | 3.6 |
| BTGMXD425-B | G3 | 29.7 | 36.4 | 42.5 | 1230 | 480 | 1628 | 4 |
| BTGMXD465-B | G4 | 32.7 | 40.1 | 46.5 | 1339 | 480 | 1628 | 4.4 |
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air: ≤2%
         Pressure drop≤0.012MP
         Noise≤75dB(average); <
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal Briquette Machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Horizontal Briquetter, Horizontal Briquetting Press, Horizontal Briquetting Machine, Horizontal Block Making Machine, Horizontal Briquette Making Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobalingmachine.com