Turbine flow meter is composed of turbine flow sensor and display instrument. It is manufactured by our factory using advanced foreign technology and is an ideal flow meter for liquid flow. Flowmeter has the characteristics of simple structure, high precision, easy installation and maintenance. HJ-LWGY turbine flowmeters are widely used in petroleum, chemical, metallurgy, water supply, papermaking, environmental protection, food and other fields.
　　
　　 Turbine flow meter composition instructions:
　　
1. Body
　　
The body of the watch body is generally steel or cast iron, and its ends are flanged. Small-caliber gauges also have threaded connections.
　　
2. Measured components
　　
The turbine has precision machined blades, which together with a set of reduction gears and bearings form a measuring assembly. The two high-precision stainless steel permanent self-lubricating bearings of the helium turbine guarantee a long service life of the assembly. Turbine flowmeters can also be lubricated with external lubricating oil pumps, but care must be taken not to overshoot them.
　　
3. counter
　　
The counter panel has the following important information:
　　
(1) Maximum operating temperature and pressure:
　　
(2) Metering and minimum and maximum flow ratings
　　
(3) Product Model and Number
　　
(4) Explosion-proof grades and signs
　　
(5) Equivalent to the fluid corresponding to the low frequency or high frequency pulse and the connection mode.
　　
4. Rectifier
　　
The rectifier is used to make the fluid flow in the turbine flow meter in a regular state, thereby eliminating the unfavorable effects of disturbances on metering. High measurement accuracy.
　　
5. Magnetically coupled transmission device
　　
The device separates the counter part in the atmosphere from the gas to be measured and transfers the rotation of the measuring assembly to the counter.
　　
Huajiang Automation can provide you with professional turbine flowmeter selection suggestions and reliable turbine flowmeter products. Any questions may cause us to have professional technical personnel to help you answer and hope to bring you help!
Transmission Line Steel Tubular Tower
Our steel poles are made from quality sheet through bending,
forming, automatic welding and hot galvanization. We can reach one-run
machining length of 14m and can bend sheet of thickness up to 45mm. We
adopt advanced welding procedures, automatically weld main joints and
reach rank-II welding quality. We
have got 500kV Transmission Line Tubular Tower Quality Certificate from Power
Industry Steel Tower Qualified Inspection & Test Center from 2009
year.
Transmission Line Steel Tubular Tower, Transmission Line Tower, Steel Tubular Tower, Mono Steel Tower
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com