TOKO E71T-1C Filled Metal Flux Cored Welding Wire in Spools
1. Excellent welding performance, soft and stable arc.
2. Low spatter loss, easy slag removal, Beatiful appearance of weld and high X-ray safty
3. Rutile type flux cored wire of 490Mpa high tensile steel
Instruction
1. Gas- Shielded:100% CO2 OR 75% Ar 25% CO2
2. When welding, the gas flow rate shoule keep between 15L/min and 25L/min
3.The oil stains and rust on the welding should be cleared away.
Chemical Composition of Deposited Metal
| Item | C | Mn | Si | P | S | Cr | Ni | Mo | V | Cu |
| Standard | ≤0.18 | ≤1.75 | ≤0.90 | ≤0.03 | ≤0.03 | ≤0.20 | ≤0.50 | ≤0.03 | ≤0.08 | ≤0.35 |
| ( AWS E71T-1) |
Machanical Properties of Deposited Metal
| Item | YP Rel/ Mpa | Tensile Strength/ Mpa | Elongation % | Impact Value | Impact Energy | Average (J) | ||||
| Standard | ≥400 | ≥480 | >20 | -20 | >27 |  | ||||
| ( AWS E71T-1C) | ||||||||||
Reference Welding Parameter (DC+) & Voltage Range
| Â | 1.2MM | 1.6MM | ||
| Â | ||||
| Volt | 16-34V | 22-42V | ||
| Amp | 120-320A | 180-400A | ||
| CO2 Flow | 15-25L/Min | 15-25L/Min | ||
Application
Shipbuilding, Offshore, bridge, pressure vessal and general fabrications etc.
Â
TOKO E71T-1C Filled Metal Flux Cored Welding Wire in Spools
1. Excellent welding performance, soft and stable arc.
2. Low spatter loss, easy slag removal, Beatiful appearance of weld and high X-ray safty
3. Rutile type flux cored wire of 490Mpa high tensile steel
Instruction
1. Gas- Shielded:100% CO2 OR 75% Ar 25% CO2
2. When welding, the gas flow rate shoule keep between 15L/min and 25L/min
3.The oil stains and rust on the welding should be cleared away.
Chemical Composition of Deposited Metal
| Item | C | Mn | Si | P | S | Cr | Ni | Mo | V | Cu |
| Standard | ≤0.18 | ≤1.75 | ≤0.90 | ≤0.03 | ≤0.03 | ≤0.20 | ≤0.50 | ≤0.03 | ≤0.08 | ≤0.35 |
| ( AWS E71T-1) |
Machanical Properties of Deposited Metal
| Item | YP Rel/ Mpa | Tensile Strength/ Mpa | Elongation % | Impact Value | Impact Energy | Average (J) | ||||
| Standard | ≥400 | ≥480 | >20 | -20 | >27 |  | ||||
| ( AWS E71T-1C) | ||||||||||
Reference Welding Parameter (DC+) & Voltage Range
| Â | 1.2MM | 1.6MM | ||
| Â | ||||
| Volt | 16-34V | 22-42V | ||
| Amp | 120-320A | 180-400A | ||
| CO2 Flow | 15-25L/Min | 15-25L/Min | ||
Application
Shipbuilding, Offshore, bridge, pressure vessal and general fabrications etc.
Â
Motor Home Parts is used on motor homes. Motor homes, also called "homes on wheels", both "room" and "car" two big functions, but its attribute or car, is a kind of portable and has the basic facilities of car home.
Motor Homes is made of imported fashion facilities, home facilities, includes: bed, stove, refrigerator, cabinets, sofas, eat desk and chair, toilet facilities, air conditioning, TV, acoustics, such as furniture and appliances, can be divided into driving area, living area, bedroom, health, kitchen area and so on in the region and motor homes is "food, clothing, shelter, line", implement "life" in life to travel, travel of fashion products
Motor Home Parts,Zinc Die Casting Motor Mount,Zinc Die Casting End Cap,Zinc Die Casting
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.aldiecastings.com