Testing equipment Stainless steel TOYO ink flow Viscosity Zahn Cup
Description:
The Newtonian viscosity cup is used to test or similar Newtonian fluid viscosity.
In workshops, factories and laboratories used anywhere for quick check and adjust a variety of different fluid viscosity. Should be selected before using the appropriate number of cups in order to control the outflow of time between 10 to 90 seconds.
Note: Use when you need a relatively high precision stopwatch.
Use instruction:
Every zahn cup has a 12inches annular holder,hold it until the cup immerges the liquid.And there is a ring on the middle of the holder,it is for keeping vertical when immerging.When the liquid is over the cup,lift the ring ,pull vertically,until the cup already out of the liquid,press the second watch at the same time.You can see the liquid flows out of the cup through the small hole which at the bottom of it .Until all the liquid is out of the cup,stop the second watch at the same time.Then the reading on the second watch,is the viscosity value of the liquid.
Specifications:
Cup body volume: 44ml
Cup Body Material: Stainless steel
Net Weight: 0.2kg (0.4 pounds)
Size: 390 * 48 * 37mm
Â
| Model Number | Aperture | Measurement Range | Measuring Temperature |
| 2# | 2 mm | ~70 | Indoor Temperature |
| 3# | 3 mm | 20~250 | |
| 4# | 4 mm | 80~700 | |
| 5# | 5 mm | 200~1000 | |
| 6# | 6 mm | 400~2000 | |
| 7# | 7 mm | 900~3000 |
Application:
 Accurate measurement of ink viscosity, precise color matching.
Â
Contact Us :
| Ms Eva Xu  |
| Shantou Jielian Tech Co.,Ltd  |
| TEL:86-754-88733293    FAX:86-754-88782162 Mob /:86-13729200293 Wh a ts app:13715964367  Q Q:2364543767  |
| Web:http://JielianTech.en.made-in-china.com/ |
2002N Belt Fastener is composed of two U-shape nails and U-shape buckles. The interlaced layout of the interior structure increases the joint strength and lowers the density of the fasteners. The fasteners are directly embedded into the pin body, which makes it durable and resistant to abrasion.
|
Model |
The Thickness of the Conveyor Belt (mm) |
The Tensile Strength of the Conveyor Belt (N/mm) |
The Minimum Diameter of the Wheel (mm) |
|
HLGK-10mm |
8-10 |
1000 |
250 |
|
HLGK-12mm |
10-12 |
1200 |
|
|
HLGK-14mm |
12-14 |
1250 |
2002N Belt Fastener
Belt Fastener,U Shape Buckles,Belt Mechanical Coupling Head,U Shaped Joint Conveyor Belt Fastener
Huozhou Coal and Electricity Group Bailong Industry and Trade Co., Ltd. , https://www.hltransportbeltbuckle.com