Sn High Pressure Three Screw Fuel Oil Pump

Viscosity: 3.0~ 760 mm2/ s; Flow range: 0.2~ 400m3/h,; Maximum pressure: 0-4.0 Mpa;

1. Application

Three Screw Pumps of SN series and 3G series are used to transferring lubricant, no solid contained and non-corrosive mineral oil, animal oil, vegetable oil and other lubricant liquid mediums, such as lube oil and fuel oil. Preferable viscosity of medium: 3 ~ 760 c. S. T Working temperature should be lower than 200 centigrade.

2. Basic Principle

The three screw pump is a kind of positive displacement pump (PDP) and it's composed of three meshed screw axis and the pump body which contains them. All of they form the sealing line which isolates the suction cavity and discharge cavity and also these two separated sealing cavities. When the screw axis turns, the sealing line will periodically make axial motion from suction cavity to discharge cavity, which continuously push the medium liquid from suction chamber into discharge cavity.

3. Performance Features

A. Stable working, low noise, without agitation of medium, small pulsation over flux and pressure.
B. High self-priming, no need of bottom valve or oil-pouring before start-up
C. Long life.
D. Equipped with safety valves to ensure operating safely.

4. Structure

Three Screw Pump is composed of pump body, pump liner, pump cover, driver screw axis, two driven screw axis, mechanical seal and other accessories. Safety valve is composed of valve body, seat, safety valve trim, spring and adjustment screw spindle (left hand turning), it will be installed on the top of the pump body.
 
 

Small Concrete Plant

Small concrete mixing equipment chooses the high-performance mixing host-Concrete Mixer. The performance of the mixer is a big factor affecting the quality of concrete. This requires the majority of mixing station equipment users to choose the correct mixer. The maintenance and maintenance of the mixer must not be ignored. . The choice and proportion of concrete ingredients and the order of delivery. The material is also particular about it. The ratio of the material is first prepared. This is the key. After the ratio of the material is prepared, start feeding. In addition, it is not that the longer the mixing time or the shorter it is, the mixing time must be appropriate, and different times should be selected according to different concretes. When the mixing time is up, the machine should be stopped. In addition, the reasonable and full use of the concrete residue of the small concrete mixing plant not only saves production and improves production efficiency, but more importantly, it realizes the use and recycling of waste, which highlights the protection of the environment.

The small Concrete Batching Plant uses a combined structure and modular units. It is convenient and simple in terms of equipment and relocation, which is convenient for transportation and equipment. It has low requirements for factory address.

Concrete Batching Plant Price

Small concrete mixing plant has low investment ratio, low noise, low dust, good sewage treatment and high concrete utilization rate. Another key point is that the investment is small and the results are quick.

The small concrete batching plant has the characteristics of high degree of mechanization and automation, high productivity, high mixing rate, homogeneous mixing of concrete, low dust concentration and noise, and high accuracy of material measurement.

Small Concrete Plant,Small Concrete Batching Plant,Batching Plant Concrete,Concrete Batching Plant Price

Zhengzhou SMART Machinery Manufacture Co.,Ltd , https://www.simamax.com