We are professional manufacturer for Water vacuum pump/Electric vacuum pump, our Water vacuum pump/Electric vacuum pump is with high and stable quality, and we have made many water pump solutions for many customers.
Water vacuum pump/Electric vacuum pump
1. Impact instructure2
2. Small volume
3. Low noise
2SK Liquid Ring Vacuum Pump
Model: SK, 2SK, SZ, SZB
Water ring vacuum pump
XD, 2X, 2XZ, 2XZ-B
Slice type vacuum pump
Application: Air, Gas
Capacity range: 1.35~108m3/min
Limited vacuum range: -98~5PA
Caliber range: 10~300mm
Power-range: 0.37~185kW
Max medium temperature: 70° C
Material: Cast iron, Aluminium alloy, Stainless steel
Technical parameters:
2SK series double-stage liquid ring vacuum pump
Type suction amountm3/min utmost pressure power(kw) rotary speed(r. P. M) (L/min) caliber of the suction port and drain port
Max Pressure/
0.093Mpa mmHg MPa
2SK-1.5 1.5 0.9 -730 -0.097 4 1440 1015 φ 40
2SK-3 3 2 -735 -0.098 7.5 1440 1520 φ 40
2SK-6 6 4 -735 -0.098 15 1460 2535 φ 70
2SK-12 12 8 -735 -0.098 22 970 4050 φ 100
2SK-30 20 14 -735 -0.098 45 740 6080 φ 125
2SK-30 30 20 -735 -0.098 55 740 7090 φ 125
2SkP1 series double-stage liquid ring vacuum pump------air ejecting pump unit
Type suction amountm3/min utmost pressure power(kw) speed flow pump body material
Pressure=0.093Mpa(-700mmHg)
MmHg MPa
2SK-1.5P1 1.05 0.9 0.75 -750 -0.099 4 1440 1015 stainless steel
2SK-3P1 2.1 1.8 1.5 -750 -0.099 7.5 1440 1520 stainless steel
2SK-6P1 4.2 3.6 3 -750 -0.099 15 1460 2535 stainless steel
2SK-12P1 8.4 7.2 6 -750 -0.099 22 970 4050 stainless steel
2SK-20P1 14 12 10 -750 -0.099 45 740 6080 stainless steel
2SK-30P1 21 18 15 -750 -0.099 55 740 7090 stainless steel
Note: 1. The value in the table is obtained under the following condition: Air pressure is 0.1013Mpa760mmHg; Inlet water temperature is 20; Relative air humidity is 70.2. The value is obtained when the supplied water amount is the suction pressure 0.05Mpa(400mmHg). It can be bigger than this when it reaches utmost vacuum. 3. The performance difference will not exceed ± 10
| Brief introduction | Â | Â | |
| Liquid Ring Vacuum Pump | Â | Option | |
| SK | Thread connection liquid ring vacuum pump | Mechanical sealed, widely used in Foodstuff,Medicine Package, Disinfectant, Printing, Dyeing, Weaving, Plastic Industry | Cast iron/SS |
| SK-A | Thread connection liquid ring vacuum pump, coat disposal | Specially designed for Plastic Industry, coat disposal inside the pump cavity, can work continuously, solve the problem of seriously scaling in hard water condition, can start when stopping for a long time | Â |
| SK-C | Thread connection liquid ring vacuum pump, coat disposal, higher vacuum | higher vacuum degree than SK-A | Â |
| SK-D | Flange connection liquid ring vacuum pump | Added flanged fitting based on SK-A Series | Cast iron/SS |
| SK-E | Flange connection liquid ring vacuum pump, higher vacuum | higher vacuum degree than SK-D | Â |
| 2SK-B | Two stage liquid ring vacuum pump | Two-stage Strap drived, High Ultimate Vacuum,Energy-saving, Low Noise. | Cast iron/SS |
| 2BEA/2BEC | medium/big size liquid ring vacuum pump | Used widely at paper mill, chemical, petrification, medicines manufacture, food, metallurgy etc | Cast iron/SS |
| Â | Â | Â | Â |
| Water pump | Â | ||
| IZ/BL | Centrifugal water pump | Â | |
We are professional manufacturer for Water vacuum pump/Electric vacuum pump, our Water vacuum pump/Electric vacuum pump is with high and stable quality, and we have made many water pump solutions for many customers.
Water vacuum pump/Electric vacuum pump
1. Impact instructure2
2. Small volume
3. Low noise
2SK Liquid Ring Vacuum Pump
Model: SK, 2SK, SZ, SZB
Water ring vacuum pump
XD, 2X, 2XZ, 2XZ-B
Slice type vacuum pump
Application: Air, Gas
Capacity range: 1.35~108m3/min
Limited vacuum range: -98~5PA
Caliber range: 10~300mm
Power-range: 0.37~185kW
Max medium temperature: 70° C
Material: Cast iron, Aluminium alloy, Stainless steel
Technical parameters:
2SK series double-stage liquid ring vacuum pump
Type suction amountm3/min utmost pressure power(kw) rotary speed(r. P. M) (L/min) caliber of the suction port and drain port
Max Pressure/
0.093Mpa mmHg MPa
2SK-1.5 1.5 0.9 -730 -0.097 4 1440 1015 φ 40
2SK-3 3 2 -735 -0.098 7.5 1440 1520 φ 40
2SK-6 6 4 -735 -0.098 15 1460 2535 φ 70
2SK-12 12 8 -735 -0.098 22 970 4050 φ 100
2SK-30 20 14 -735 -0.098 45 740 6080 φ 125
2SK-30 30 20 -735 -0.098 55 740 7090 φ 125
2SkP1 series double-stage liquid ring vacuum pump------air ejecting pump unit
Type suction amountm3/min utmost pressure power(kw) speed flow pump body material
Pressure=0.093Mpa(-700mmHg)
MmHg MPa
2SK-1.5P1 1.05 0.9 0.75 -750 -0.099 4 1440 1015 stainless steel
2SK-3P1 2.1 1.8 1.5 -750 -0.099 7.5 1440 1520 stainless steel
2SK-6P1 4.2 3.6 3 -750 -0.099 15 1460 2535 stainless steel
2SK-12P1 8.4 7.2 6 -750 -0.099 22 970 4050 stainless steel
2SK-20P1 14 12 10 -750 -0.099 45 740 6080 stainless steel
2SK-30P1 21 18 15 -750 -0.099 55 740 7090 stainless steel
Note: 1. The value in the table is obtained under the following condition: Air pressure is 0.1013Mpa760mmHg; Inlet water temperature is 20; Relative air humidity is 70.2. The value is obtained when the supplied water amount is the suction pressure 0.05Mpa(400mmHg). It can be bigger than this when it reaches utmost vacuum. 3. The performance difference will not exceed ± 10
| Brief introduction | Â | Â | |
| Liquid Ring Vacuum Pump | Â | Option | |
| SK | Thread connection liquid ring vacuum pump | Mechanical sealed, widely used in Foodstuff,Medicine Package, Disinfectant, Printing, Dyeing, Weaving, Plastic Industry | Cast iron/SS |
| SK-A | Thread connection liquid ring vacuum pump, coat disposal | Specially designed for Plastic Industry, coat disposal inside the pump cavity, can work continuously, solve the problem of seriously scaling in hard water condition, can start when stopping for a long time | Â |
| SK-C | Thread connection liquid ring vacuum pump, coat disposal, higher vacuum | higher vacuum degree than SK-A | Â |
| SK-D | Flange connection liquid ring vacuum pump | Added flanged fitting based on SK-A Series | Cast iron/SS |
| SK-E | Flange connection liquid ring vacuum pump, higher vacuum | higher vacuum degree than SK-D | Â |
| 2SK-B | Two stage liquid ring vacuum pump | Two-stage Strap drived, High Ultimate Vacuum,Energy-saving, Low Noise. | Cast iron/SS |
| 2BEA/2BEC | medium/big size liquid ring vacuum pump | Used widely at paper mill, chemical, petrification, medicines manufacture, food, metallurgy etc | Cast iron/SS |
| Â | Â | Â | Â |
| Water pump | Â | ||
| IZ/BL | Centrifugal water pump | Â | |
Compost Bin
Our factory have many different kinds of compost pail for you to choose. The stainless steel one, and color painting is available. Which also have the Iron material with powder coating items. OEM products is no problem. Welcome to choose the suitable one and ask for more details and the quotation. I believe our rich experience can more helpful for you.
For the compost bin, Excellent quality compost suitable for your kitchen or outside. The airtight lid and replaceable activated-charcoal filter can control odors naturally ,if you need the more better effect, double filter is available. One piece design can resists rust and leaks, big capacity is very useful to enough compostable organic kitchen waste.
The excellent quality compost pail is easily clean and be dry, also the activated-charcoal filter can be cleaned with water and soap ,and easily to replace by another filter.
Material:SS304/SS201/Iron
Finishing: Satin polishing ,Mirror Polishing ,Color painting, Powder Coating
Logo: Laser logo, Etching logo, Silk printing logo, Embossed logo, Decal logo
MOQ : 2000 PCS
Packaging : White box, Mail box or Customized package
Sample Time : 7~10 days
Lead Time :60 days after have the deposit
Payment: T/T ,L/C or others
Payment term: 30% deposit before production and 70 % balance against the copy B/L
FAQ:
1:How can I get the sample?
We can provide the sample for customers to check the quality.
Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.
You can do the payment of sample via T/T and PayPal.
2:How about the sample time?
Usually the sample time is 7~10 days after have the sample cost.
3:How long will it take for mass production?
Usually 45~60 days after have the deposit.
4:Can we have our logo or company name to be printed on your products or the package?
Welcome OEM.
5:what certificate can you provide?
CE,CB,GS,FDA,LFGB,ROHS are available here.
6:How can we get your monthly new products announcement?
Please join our mailing lists.
Our Service
Excellent quality
OEM packaging and product
Good service
Rich experience save your time and money
Compost Bin,Multicolor Compost Bin,Deodorant Compost Bin,Stainless Steel Compost Bin
Jiangmen Wellway Houseware Co.,Ltd , https://www.wellway-jm.com