Quality Disposal and Failure Analysis Gear Body Damage Discussion


The mechanical properties were cut on the No. 2 test piece to test the mechanical properties. The results did not meet the technical requirements. The microstructure of the microstructure is sampled at the bright region of the fracture surface, that is, at the location of the fracture source, and ground. Under the optical microscope, the crack has certain stress crack characteristics, and the straight and strong force is distributed along the crystal. There are secondary cracks along the main crack near the main crack. After the sample was eroded by 4 nitric acid alcohol solution, there was no decarburization on both sides of the crack. The microstructure was oriented to the obvious tempered sorbite ferrite. The metallographic structure of the crack extension zone was tempered sorbite iron. sdsee.
The non-metallic inclusions are taken from the fracture to take the longitudinal specimen, and the non-metallic inclusions are tested. The microstructure of the crack source region is A2.5e, B3.0, C0, D0 (according to GB/T10561-1989 standard); The technical requirements are A2.5, B2.5, and the test results exceed the technical requirements.
The scanning electron microscopy was used to observe the microscopic morphology of the bright surface of the fracture surface of the No. 1 test piece. The fracture surface of the fracture surface of the No. 1 specimen was observed. The surface of the fracture surface was further enlarged to observe the microscopic morphology as the cleavage quasi-cleavage. See 6, the crystalline zone is cleavage.

Metal Baler

The trends of the metal recycling industry

Unlike many other materials, most metal more than pays for its own recycling in the consumer and industrial waste. because the demand for metal scrap continues to rise and recycling metal saves more than 90 per cent of the energy required versus producing new metal.
The economics of metal scrap contributes to its position as one of the most recycled metals in the World.


What is the role of metal baler in metal scrap recycling?

The metal scrap can be directly pressed into bales by using the hydraulic metal baler from China factory YMSRECYCLING to make the high efficient metal recycling and increase the value of residual steel scrap.

Recycling metals also requires less energy than producing new metals. Also conserves natural resources. Recycling conserves diminishing natural resources.

Application Metal Baling Press Machine Ymsrecycling



How to choose a suitable metal baler?

The Y81 series Scrap Metal baler could press all ferrous metals from steel to stainless steel can be recycled as well as non-ferrous metals such as copper, brass, and aluminium, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.


Y81 series hydraulic metal baler mainly include the following models.

Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
We also support the design and manufacture of other model versions upon request.


Y81Q-Manual operation (Front push discharge )

Y81q Metal Baling Press Machine Ymsrecycling

Y81F-Manual operation (Side turn discharge )

Y81f Metal Baling Press Machine Ymsrecycling

Y81F-Semi-automatic operation (Side turn discharge )

Y81f Metal Baling Press Machine Ymsrecycling

Y81T-Semi-automatic operation (Side push discharge )

Y81t Metal Baling Press Machine Ymsrecycling

Y81S-Semi-automatic operation (Double main press discharge )

Y81s Metal Baling Press Machine Ymsrecycling

We provide a variety of models of the hydraulic metal baler, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.


YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Metal Baling Press can be customized and extended according to the actual needs of your on-site.


CONTACT YMSRECYCLING
Call us now on +86-15950122559


To start maximising your returns from your metal scrap recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.

Metal Baler,Aluminum Metal Recycling Baler,Automatic Aluminum Waste Metal Baler,Steel Metal Baling Press Machine

Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com

This entry was posted in on