Fully automatica PET characteristic viscosity can be controlled very well without complicated precrystallization dryer system.  The IV drops less then 0.03 during the whole production process. And the IV can be improved by adding some suitable additives.
B. Normal components of Plastic Granulating Machine for PET BottlesÂ
| No. | Machine name | Qty |
| 1 | Vacumn feeder | 1set |
| 2 | Compacting dryer | 1set |
| 3 | Horizontal discharge screw | 1set |
| 4 | Forced feeding system of extruder inlet port | 1set |
| 5 | Twin screw extruder | 1set |
| 6 | Roots vacuum system | 1set |
| 7 | Double plate single working position hydraulic screen changer system |
1set |
| 8 | Water tank | 1set |
| 9 | Underwater pelletizer | 1set |
| 10 | Dewatering machine | 1set |
| 11 | Wind transmission system | 1set |
| 12 | Silo | 1set |
| 13 | Electric control cabinet | 1set |
C. Specifications of Plastic Granulating Machine for PET Bottles :
| Model | CT6510 | CT7512 | CT9516 |
| Output | 300 | 500 | 1000 |
D.Detailed machine photos of Plastic Granulating Machine for PET Bottles :
Vacuum feeder to feed PET flakes into the compactor dryer
Horizontal discharge screw & forced feeding system of extruder inlet port
Roots vacuum pump system
Hydraulic screen changer & strand die
Down-stream device(plastic pelletizer, centrifugal dryer air transmission system etc)
PET granules
Our service
In-sale:
• Detailed design of lay-out that is the position of the procession
• Technological information of provided products
• Schedule about design,manufacturing and installationÂ
• Working & Producing progression
• Training course for the technician so that the installation is safe and standard
After-sale:Â
• For customers buying our products, we provide them free training so that they can use and maintain the machine independently.
• We will answer customer's question on technology in time. If needed, we will offer on-site guidance and assistance.
• We can provide free technical guidance if customers need new equipment, add or rebuild equipment.Â
Feel free to contact with me if you have any questions:
Contactor: Ms Laura
Mobile: +86-159 6236 6319
Fully automatica PET characteristic viscosity can be controlled very well without complicated precrystallization dryer system.  The IV drops less then 0.03 during the whole production process. And the IV can be improved by adding some suitable additives.
B. Normal components of Plastic Granulating Machine for PET BottlesÂ
| No. | Machine name | Qty |
| 1 | Vacumn feeder | 1set |
| 2 | Compacting dryer | 1set |
| 3 | Horizontal discharge screw | 1set |
| 4 | Forced feeding system of extruder inlet port | 1set |
| 5 | Twin screw extruder | 1set |
| 6 | Roots vacuum system | 1set |
| 7 | Double plate single working position hydraulic screen changer system |
1set |
| 8 | Water tank | 1set |
| 9 | Underwater pelletizer | 1set |
| 10 | Dewatering machine | 1set |
| 11 | Wind transmission system | 1set |
| 12 | Silo | 1set |
| 13 | Electric control cabinet | 1set |
C. Specifications of Plastic Granulating Machine for PET Bottles :
| Model | CT6510 | CT7512 | CT9516 |
| Output | 300 | 500 | 1000 |
D.Detailed machine photos of Plastic Granulating Machine for PET Bottles :
Vacuum feeder to feed PET flakes into the compactor dryer
Horizontal discharge screw & forced feeding system of extruder inlet port
Roots vacuum pump system
Hydraulic screen changer & strand die
Down-stream device(plastic pelletizer, centrifugal dryer air transmission system etc)
PET granules
Our service
In-sale:
• Detailed design of lay-out that is the position of the procession
• Technological information of provided products
• Schedule about design,manufacturing and installationÂ
• Working & Producing progression
• Training course for the technician so that the installation is safe and standard
After-sale:Â
• For customers buying our products, we provide them free training so that they can use and maintain the machine independently.
• We will answer customer's question on technology in time. If needed, we will offer on-site guidance and assistance.
• We can provide free technical guidance if customers need new equipment, add or rebuild equipment.Â
Feel free to contact with me if you have any questions:
Contactor: Ms Laura
Mobile: +86-159 6236 6319
Plastic Food Container Making Machines
High speed injection machine specially profuce thin wall products like one time use food containers.
We have totally four size machine to choose, 268ton, 328ton, 358ton and 428ton can satisfied different production requires from customers.
Videos can be provided.
Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power.
The strengthening design of template is carried out through multiple times of optimization design of major components such as template, based on the analysis of finite element software, which both guarantee the lifetime of template and protected mould.
High rigid template adopts the structure with coexistence of installation screw hole and T-shaped groove.
The tie rod of each machine model has passed the test by professional testing organization, which means that, the deflection of tie rod is within reasonable scope while guaranteeing the operation of machine.
Plastic Food Container Making Machines,Fast-Food Container Plate,Plastic Egg Making Machine,Fast-Food Container Plate Making Machine
Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyong-machinery.com