- Model NO.: ZYYX Series
- Forging Forming Method: Cold Roll Forming
- Feature: Automation
- Warranty: 12 Months
- Advantage: Easy to Maintenance
- Machine Color: Made-to-Order
- Delivery Time: About 80days
- Roller Process: CNC. Plate with Hard Chrome
- Name: Metal Deck Roll Forming Machine
- Transport Package: 2X 40 Gp
- Origin: China
- Type: Rolling Machine
- Power Source: Electric
- Certification: ISO9001, CE
- Customized: Customized
- Condition: New
- Certificate: ISO,Ce,Soncap
- Machines Weight: About 30t
- Shaft: 82mm Solid Steel
- Trademark: zhongyuan
- Specification: ZYYX64-305-1220
- HS Code: 84552210
Metal forming machine
Cold roll forming machine
Product Feature:
The metal deck produced by floor deck forming machine has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel mold plate, but also reduces the weight of storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.
Machine's components:
Floor deck forming machine consists of uncoiler, coil sheet guiding device, main roll forming system, cutting device, hydraulic station, PLC control system and support table.
Main technical parameters:
1. Suitable material: Color steel sheet or galvanized steel sheet
2. Thickness of raw material: 0.8_1.2mm
4. Forming speed: About 10-15m/min
5. Power Requirement Main motor power: 11*2Kw(Depend on final design)
Hydraulic station power: 5.5Kw(Depend on final design)
6. Uncoiler's loading capacity Max. Capacity: 5000kgs (can be increased to be 10T)
7. Controlling system: Mitsubishi PLC & converter
8. Voltage: 440V 3 phase 60Hz or as per the customer's requirement
9. Machine with CE certificate.
Data sheet
| Iterm | Specification | |
| Material | Type | Color steel sheet or galvanized steel sheet |
| Thickness(mm) | 0. 8 -1.2 | |
| Tensilestrength(mpa) | 720 | |
| Roller material | 45#Chrome steel | |
| Forming speed(m/min) | About 10-15m/min | |
| Speed adjusting mode | AC Frequency | |
| Cutting mode | Hydraulic cutting | |
| Cutter material | Cr12 mold steel | |
| Length measurement | Encoder | |
| Control mode | Mitsubishi  PLC | |
| Operating mode | Button + Mitsubishi Touch screen | |
| Main motor power(kw) | 11*2KW   (Depend on final design) | |
| Hydraulic station power | 5.5K W   (Depend on final design) | |
| Uncoiler's loading capacity | Max. Capacity: 5000kgs (can be increased to be 10T) |
|
| Machine weight | About 30000kgs | |
|
Components of machine: | ||
| Decoiler | 1set   | |
| Feeding & guiding device | 1set | |
| Pressing system | 1set | |
| Main roll forming machine | 1set | |
| Cutting device | 1set | |
| Hydraulic cutting system | 1set | |
| PLC Controlling system | 1set | |
| Run out table | 1set   | |
|
Process flow: Decoiler -- Feeding & Guiding -- Pressing--Roll Forming--Hydraulic Cutting - Product to Run Out Table | ||