Model NO.: YL-S70
Loading Method: Dynamic Load
Display: Computer Display Mode
Control: Computer Control
Weight: 0-100Kg
Power Source: AC220V
Oil Cylinder Position: None
Net Weight: 45kg
Test Distance: 450mm
Capacity Selection: 10n,20n,50n,100n,200n,500n,1kn,2kn,5kn
Force Unit Conversion: N,Kn,GF,Kgf,Lbf,Kp,TF(Si),TF(Long)etc.
Length Unit: mm,Cm,Inch,M,Km,Um etc.
Stroke Resolution: 1/500,000mm
Force Resolution: 1/500,000
Machine Accuracy: Better Than 0.5
Motor: Servo Motor Drive
Standard Config.: USB 232 Line, Software
Trademark: Yuelian
Transport Package: Export Standard Plywood Box
Specification: size(L*W*H mm): 510*590*1061
Origin: China
HS Code: 9031809000
Material Tensile Testing Instruments With TUV CEÂ Certicate (YL-S70)
1. Introduction
This tester is designed for conduct tensile, compression,  bending,  shearing, bonding strength,  peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials.  It is a basic equipment of quality control, receiving inspection, physical  test, mechanics research, material  development.
2.Detail graph
3.Machine structure:
| 1>.AC servo motor drive, precision ball screw drive |
| 2>.Screw shield using aluminum  extrusion, surface blasting, anode satin handle, exquisite |
| 3>.Shell selection of advanced electrostatic spray treatment, durable |
| 4>.Vertical stroke trim switch |
| 5>.Quick release connectors, you can  easily switch to a different function fixtures |
| 6>.Machine protection: over-travel, over capacity protection, emergency brake switch |
4.Machine function
1>. Powerful data analysis and statistical curves graphical analysis aids, with zoom, pan, crosshairs, and take other functions.
2>. Â Several historical test data can be transferred to the graphics displayed simultaneously comparative analysis done.
3>. Up to 7 interval setting, 40 manual taking points, Â 120 automatic pick point function. With the maximum, minimum, average, to the level of the average, median, standard deviation, population standard deviation, CPK values and other statistics.
4>. Test curve shows: during the test in real time and can be a show of force at the  same time - displacement, force - time, displacement - time, stress - strain curve, can easily switch to the screen to see the curve.
5>. Â Custom test methods: with the speed, position shift, Â given the strength, will power rates, given stress, stress rate constant, constant strain, strain rate and other fixed control mode, enabling complex multi-step control can be nested loop. set automatic return, automatic judgment fracture, auto-zero function.
6>. Positive and negative force sensor can be switched.
5.Specification
| Mode | YL-S70 | YL-S71 | YL-S72 | YL-S73 |
| Machine size(W*D*H)(mm) | 510×590×1061 | 510×590×1325 | 510×590×1530 | 510×590×1880 |
| Net weight | 45KG | 50KG | 55KG | 70KG |
| Test Distance | 450mm | 700mm | 1000mm | 1300mm |
| Capacity selection | 10N,20N,50N,100N,200N,500N,1KN,2KN,5KN(Optional dual capacity, with rapid replacement requirements) |
|||
| Stop mode | Overload shutdown, emergency stop button, specimen failure automatically shut down, the upper and lower limits set automatically shut down |
|||
| control method | Full computer control, powerful software | |||
| Force unit conversion | N,kN,gf,kgf,lbf,kP,tf(SI),tf(long)etc. | |||
| Length unit | mm,cm,Inch,m,km,um etc. | |||
| Stress unit | Pa,Kpa,Mpa,Gpa,KN/,N/ etc. | |||
| Force resolution | 1/500,000 | |||
| Machine accuracy | Better than 0.5 | |||
| Stroke resolution | 1/500,000mm | |||
| Acquisition rate | 50 time/S | |||
| Speed range | 0.01~500mm/min(can specify) | |||
| Test Distance | Ø140mm | |||
| motor | Servo motor drive | |||
| power | 400W | |||
| volt supply | 220V 50~60HZ | |||
| standard config. | USB 232 line, software | |||
| option | Two-point extension meter, fixture | |||
6.Tensile Testing Report
Â
Wenzhou Yecheng Auto Parts Co., Ltd. , https://www.hcmotionz.com