Why is the ISM 11-liter engine called an intelligent engine? Because he has an intelligent control system consisting of six intelligent functions. The six functions are fault self-diagnosis, automatic protection, cruise control, electronic speed control, and low-range operation protection. And idle speed control function.
Xi'an Cummins ISM 11 litre engine
Maintenance assistant, fault self-diagnosis function
Fault self-diagnosis system should be more familiar with everyone, it is often referred to as OBD system. The function of the OBD is that when the engine malfunctions or malfunctions, the fault will become an electronic signal sent to the engine computer, stored in the engine computer in the form of a fault code, and light up the fault on the instrument panel. The type lamp reminds the driver that the engine has failed. When the maintenance personnel perform maintenance, they can read the fault code through a special computer, and they can know where the fault is coming from, which is very helpful to the user and maintenance personnel.
Neutral protection, automatic protection
Most Xikang users may not yet know that their engine has this function and should use it only under certain conditions. Using a more appropriate adjective is "passive technique." When the car is in a neutral state, if the accelerator is accidentally stepped on, the engine is not burdened with a rapid increase in speed, and the speed is extremely high, which can easily damage the engine. When this happens, the self-protection function will limit the engine's maximum speed through the computer and control the speed within a safe range to protect the engine.
Easy to drive, cruise control
The cruise control can automatically adjust the fuel supply to control the vehicle to run at a constant speed set by the driver. When the vehicle speed is set, the driver can liberate his own feet, and he does not have to step on the accelerator to achieve the desired speed, which greatly reduces the driver's workload. At the same time, the cruise control function can also optimize the engine parameters. Improve fuel economy and improve vehicle performance.
Never speeding, electronic speed control
Inadvertent speeding may be experienced by every driver, especially on the expressway. The surrounding scenery is the same. When the reference is lacking, it is difficult to judge the speed with the senses. Electronic speed control can be controlled through electronic control to adjust the fuel supply to control the maximum speed. When the maximum speed is set, no matter how you step on the accelerator, the speed will not exceed the set maximum speed. And it can also set uphill speed regulation and downhill speed control to optimize vehicle dynamics and economy.
Avoid driving, low-level operation protection
It is well known that the engine load increases when the low gear is driven at a high speed, and the damage to the engine is extremely great. The anti-low running protection function can encourage the driver to use a higher gear by limiting the speed of the transmission when it is not at the highest level. The engine judges the gearbox position based on the vehicle speed, speed, and transmission parameters. If it is not at the highest level, it will limit the maximum speed that the vehicle can reach. It is possible to limit the speed of the sub-high and lower gears to help the driver avoid running.
I hurry to take charge, idle control function
The idle speed control function can accurately set the idling value, achieve overtime idle stop and fast idle warm-up, improve fuel economy, reduce noise and vibration, and improve engine cold performance. And all of these drivers can use the corresponding switches on the dashboard to adjust the idle speed.
We are the professional manufacturer for the Pneumatic drilling rig, supply wide range of the Drilling Machine.
Pneumatic water well drilling rig is an efficient multi-functional drilling equipment, suitable for civil drilling , geothermal drilling,and drilling irrigation wells, ground source heating pump wells and on, with a large diameter drilling,deep drilling, mobile and flexible application geographical advantages.The DTH drilling rig is especially for mountain and rock formation well projects,can be drill in different layers.The pneumatic well drilling rig can drill holes with air compressor in all formations, that makes the drilling speed is very fast when drilling the hard rock. More, the maximum hole diameters could up to 300mm. Depth could up to 500m.
HQZ200
Drilling diameter : 100-254mm
Drilling depth: 200m
Drilling direction: to the ground 45°- 90°
One time advance length of the drill: 1500mm
Electric motor power: 11kw
Drilling swing speed: 52rpm
Air pressure: 1.45-2.5Mpa
Air consumption: 15-27m*3/min
Total weight: 1600kg
FAQ:
Q: How about payment terms?
A: 30% TT deposit+70% TT before shipment ,50% TT deposit +50% LC balance, Flexible payment can be negotiated.
Q:Installation and commissioning?
A:We will send our engineer for installation and commissioning, but relevant cost will be paid by you.
Q: Do you have some videos where we can see the line producing?
A: Yes, we can provide some videos for reference.
Pneumatic Water Well Drilling Machine
Pneumatic Drilling Machine,Air Compressor Drilling Machine,Air Compressor Stone Drilling Machine,Pneumatic Water Well Drilling Machine
SHANDONG HENGWANG GROUP , https://www.hwmac.com