Inflatable Yokohama Rubber Fender Best Price

Structure: Floating
Type: Yokohama-Type, Net-Type, Sling-Type
Service Life: 10-20years
Certification: BV, ISO9001, CCS, ISO17357, ABS, Dnv, Lr
Capability: Water Rubber Hose
Load Capacity: >8000teu
Usage: Trade, Ship Launching, Protection, Ship Docking
Trademark: Star-Marine
HS Code: 40169400

Inflatable Yokohama Rubber Fender

Inflatable Yokohama Rubber Fender is designed without chain and tyre net. Therefore, it has lower weight than traditional chain and tyre net rubber fenders. Meanwhile, it is an ideal type fender for some small and medium size vessels.
Features:
    1. High energy absorption and low reaction force;
    2. Light weight and high compression deformation;
    3. Good floating performance, can rise and fall with the ebb and flow of tides and the movements of ship;
    4. Easy installation and long service life.


PRODUCT INTRODUCTION
Specifications:
Type (D*L) Initial Internal Pressure 0.05Mpa Initial Internal Pressure 0.08Mpa
Guaranteed Energy Absorption (KN/m) Reaction Force (KN) Hull Pressure  at GEA (Kpa) Guaranteed Energy Absorption (KN/m) Reaction Force (KN) Hull Pressure  at GEA (Kpa)
0.5*1.0 6 64 132 8 85 174
0.6*1.0 8 74 126 11 98 166
0.7*1.5 17 137 135 24 180 177
1.0*1.5 32 182 122 45 239 160
1.0*2.0 45 257 132 63 338 174
1.2*2.0 63 297 126 88 390 166
1.35*2.5 102 427 130 142 561 170
1.5*3.0 153 579 132 214 761 174
1.7*3.0 191 639 128 267 840 168
2.0*3.5 308 875 128 430 1150 168
2.5*4.0 663 1381 137 925 1815 180
2.5*5.5 943 2019 148 1317 2653 195
3.0*5.0 965 1815 148 1341 2359 198
3.0*6.0 1184 2243 152 1646 2916 203
3.3*4.5 1175 1884 130 1640 2476 171
3.3*6.5 1814 3015 146 2532 3961 191
Note: other sizes can be made as per customers' request.

there will be about 35% carbon black residual from tyre pyrolysis machines

it could be sold directly or refined into better quality ones.

say N330 or N660

it could be widely used for additives

say rubbers for playground,  for car tyres, or shoes etc.

usually there are models with capacities from 1-20tons per hour 


Working Principle

The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.


Carbon Blacks

carbon black refining

Carbon Black Recycling Machine

Carbon Black Recycling Machine,Continuous Black Oil Recycling Machine,Oil Recycling Machine,Waste Oil Recycling Machine

Henan Lanning Technology Co., Ltd , http://www.lanningrecycling.com

This entry was posted in on