How to judge the failure of the aerial vehicle by car exhaust

The old drivers of the aerial vehicles all know a word: “looking at the six roads and hearing all directions”. They say that they must listen and see more when driving. But do you know that in fact, not only must you look at the road when you are driving, you have to raise more? Become his own habit of observing the condition of the vehicle. As long as he is careful to find out, some small faults of the aerial vehicles can also be avoided in advance.

How to judge the failure of the aerial vehicle by the color of exhaust gas?

The normal tail gas should be colorless and non-flavorous, and car exhausts with different colors and different tastes are likely to indicate that the vehicle itself is facing some failures.

When the taillights of the aerial vehicle are black, the main manifestations are: engine jitter, abnormal sound emission of the exhaust pipe, and discharge of black smoke at the same time, feeling powerless when accelerating.

Cause: There are many causes of black smoke. For example, when the cold start, the spark plug does not work well. It takes a long time for the motor to start, so that the mixed gas accumulated in the cylinder can not be completely burned, and naturally black smoke will be emitted. The ignition time of the vehicle is wrong, and black smoke will be produced ahead of time or wrongly. EFI vehicles usually emit very little black smoke. If black smoke is emitted, most of the time, the cylinder is in trouble. The “broken cylinder” is A common one.

Method: The carburetor car is now basically on its age. It is necessary to constantly check the aging of the carburetor and other parts. The carburetor car is different from the EFI car. It must be regularly maintained and adjusted to develop a good car. The habit of using cars. EFI vehicles should check the cylinder line every 30,000 kilometers, check the spark plug every 10,000 kilometers, and it is necessary to promptly

Hot Sale Laser Pipe Cutting Machine X Series

The X series pipe cutting machine has some advantages as below:

1.X2/X5/X6 is specialized for round pipe cutting.

2.The tailing is just 40mm, one pipe can be cut into 5 lengths, and the head and tail are separated automatically.

3.1.5G acceleration, labor saving and high efficency.

4.Customization of left/right models, save space and turnover area, and one person can watch multiple machines.

5.Independent pipe cutting system, user-friendly and easy to operate, and remote upgrade and fault diagnosis.

laser pipe cutting machine near me, metal pipe cutting machine, metal pipe cutter

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com