Heavy Material Rack for Receiving Materials, Stamping Process, Uncoiler

http://www.ruihui.net

In addition to unwinding, leveling, feeding, and stamping, there is usually a process in the stamping process. That is, the processed strips are processed (some are finished strips, but most are scrap).

There are two ways to deal with it:

One is to use a cutting waste machine to cut and cut, and then fall into the waste collection box;

The other way is to use a material rack to wind the tape. The first method of cutting the scraper is only suitable for the treatment of thin plates and narrow materials, and can only be used for the disposal of waste materials. Therefore, in the actual stamping production, the material is used to wind up the strips.

When winding the material, except for the terminal strip, which uses a special terminal receiver, the other uses the material rack as the winding equipment, and the most used is the large load capacity and the highest customization. The most affordable heavy material rack.

Ruihui standard heavy-duty material rack can be directly placed at the discharge port of the punching machine as the receiving material. However, when the standard heavy-duty material rack is used for receiving materials, because there is no tensioning function, the material is often wound due to different tension.

It is often the case that the receipt is not compact, the material is loose, and the material is skewed. It is impossible to achieve an efficient and stable winding operation.

Ruihui Machinery specially designed and produced a heavy-duty material rack for receiving materials. Compared with the standard heavy-duty material rack, a tension tensioning device was installed in front of the heavy-duty material rack to play the tension of the material.

The subsequent Ruihui heavy-duty material rack always maintains a constant tension when receiving materials. At the same time, the ordinary A-type iron is replaced with a large-sized material A-type iron for receiving materials, ensuring that the material is reliable and truly stable and reliable. .

When the Ruihui receiving material is used in the heavy material frame, the material frame motor rotates, and then the tensioning wheel rotates, and the tensioning motor rotates slowly to cause the tensioning wheel to convey the material from the tensioning device.



The slow tensioning of the tape causes the tape to be tensioned and not loose, so that the heavy material frame can smoothly wind the tape and at the same time the speed of the tape can be transmitted by the tensioning device.

The tensioning speed of the tension motor is adjusted by the control device so that the tensioning wheel can tighten the belt one by one, and when no belt is conveyed, the control device controls the driving of the driving motor to drive the tensioning wheel to rotate.

And because the speed of the active motor is fast, the tensioning wheel is actively rolled and tensioned to provide a material winding take-up belt, and the control device is used to adjust the tension speed of the active motor so that the tensioning wheel can roll the tensioning belt one by one to ensure receipt The quality of the volume.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

http://www.ruihui.net

In addition to unwinding, leveling, feeding, and stamping, there is usually a process in the stamping process. That is, the processed strips are processed (some are finished strips, but most are scrap).

There are two ways to deal with it:

One is to use a cutting waste machine to cut and cut, and then fall into the waste collection box;

The other way is to use a material rack to wind the tape. The first method of cutting the scraper is only suitable for the treatment of thin plates and narrow materials, and can only be used for the disposal of waste materials. Therefore, in the actual stamping production, the material is used to wind up the strips.

When winding the material, except for the terminal strip, which uses a special terminal receiver, the other uses the material rack as the winding equipment, and the most used is the large load capacity and the highest customization. The most affordable heavy material rack.

Ruihui standard heavy-duty material rack can be directly placed at the discharge port of the punching machine as the receiving material. However, when the standard heavy-duty material rack is used for receiving materials, because there is no tensioning function, the material is often wound due to different tension.

It is often the case that the receipt is not compact, the material is loose, and the material is skewed. It is impossible to achieve an efficient and stable winding operation.

Ruihui Machinery specially designed and produced a heavy-duty material rack for receiving materials. Compared with the standard heavy-duty material rack, a tension tensioning device was installed in front of the heavy-duty material rack to play the tension of the material.

The subsequent Ruihui heavy-duty material rack always maintains a constant tension when receiving materials. At the same time, the ordinary A-type iron is replaced with a large-sized material A-type iron for receiving materials, ensuring that the material is reliable and truly stable and reliable. .

When the Ruihui receiving material is used in the heavy material frame, the material frame motor rotates, and then the tensioning wheel rotates, and the tensioning motor rotates slowly to cause the tensioning wheel to convey the material from the tensioning device.



The slow tensioning of the tape causes the tape to be tensioned and not loose, so that the heavy material frame can smoothly wind the tape and at the same time the speed of the tape can be transmitted by the tensioning device.

The tensioning speed of the tension motor is adjusted by the control device so that the tensioning wheel can tighten the belt one by one, and when no belt is conveyed, the control device controls the driving of the driving motor to drive the tensioning wheel to rotate.

And because the speed of the active motor is fast, the tensioning wheel is actively rolled and tensioned to provide a material winding take-up belt, and the control device is used to adjust the tension speed of the active motor so that the tensioning wheel can roll the tensioning belt one by one to ensure receipt The quality of the volume.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

Flexible Tank

Flexible Fuel Tanks,Flexible Water Tank,Bulk Liquid Flexible Tank,Flexible Tank

Tongshuai Vehicle Components Co., Ltd. , http://www.brandflexitank.com