Guowu Dongfeng Tianlong Houshuangqiao sprinkler chassis configuration: 6×4 drive, D310 flat head standard cab, Dongfeng Cummins ISD245 50 electronically controlled high pressure common rail engine (WHTC), wheelbase 4350+1350 (mm), in front of the frame 940mm wide, 860mm wide, resistance heating cold start device, all steel 350L main fuel tank, fuel tank lock (four locks one), electronic accelerator pedal and switch, muffler side exhaust port facing side, Φ430mm push Diaphragm spring clutch, 9th gear 9JS119T-B gearbox, head gear speed ratio 9.204, the highest grade is overspeed gear, 7T front axle, 10T single-stage retarding double rear axle (Dongfeng 435), main reduction ratio 4.44, no wheel Differential speed lock, frame longitudinal section size 300×90×(8+6)mm, leaf spring number 9/10, 11.00R20 radial tire, tire level 16PR, manual adjustment arm, Dongfeng Technology ABS (4 channels) Full floating front and rear suspension mechanical shock cab suspension, hydraulic electric flip, colorless laminated front windshield, electric glass lifter, central control front door lock, airbag shock absorber driver seat, channel type instrument panel, belt Air conditioning, cruise system. Reserved interface - for use with the 12 version of the tachograph and the Beidou terminal.
The effective volume of the tank is 17.5 cubic meters. The outer dimensions of the tank (length × width × height) (mm): 6800 × 2380 × 1580; the maximum volume of 21 square.
(This article comes from Xiagong Chusheng)
1.Introduce of truck mounted Water Well Drilling Rig
1.Water wells multi-function rig is truck mounted type, also with air compressor on truck, easy move high efficiency and multifunction of drill hole equipment, it is mainly suitable for drilling Wells, geothermal air-conditioning hole hole and other USES.
2.2,The rig adopts the new type of hydraulic technology, supporting the rotary hydraulic motor with high torque and big diameter hydraulic oil cylinder, a factory engine to provide power for hydraulic system, two levels of intake air filter and air compressor design, prolong the service life of diesel engine.
3.Unique pump group design and convenient maintenance, reduce the maintenance cost.
4.Centralized control of the hydraulic control console, convenient operation.
5.Independent module design, can make the drilling rig is installed on the truck, to increase its mobility.
6.Combined the locator, but according to different types of drill pipe and is adjusting the
positioning tray, guarantee the positioning centering accurate and reliable.
Truck Mounted Drilling Rig,Truck Mounted Rig,Truck Mounted Auger Drill,Truck Mounted Borehole Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com