- Model NO.: XHBT-20SR, XHBT-30SR, XHBT-40SR, XHBT-60SR
- Machining Process: Welded Molding Machine
- Feeding Height: 1380mm
- Certification: ISO9001: 2000, CE
- Color: Green
- Trademark: YUJIE
- Origin: Henan Province
- Type: Concrete Pump
- Productivity: 50㎡/h
- Vibrating Amplitude: 1.3mm
- Condition: New
- Model Number: 30m3/H
- Specification: CE, BV, SGS
- HS Code: 84743100
Good quality CE,ISO Passed XHBT-60SA 60m3 mini electric concrete pump
31 years of manufacturing experience in China.
With CE, BV certificate.
Big sales volume every month! ! ! ! ! 1
Zhengzhou Changli Machinery Manufacturing Co., Ltd is an audited professional and experienced manufacturer and supplier of concrete pumps.
Concrete pumps with different capacity and different type meets different needs:
Electric concrete pumps: 15m3/h, 20m3/h, 30m3/h, 40m3/h, 50m3/h, 60m3/h, 70m3/h, 80m3/h, 90m3/h -----180m3/h
Diesel concrete pumsp: 20m3/h, 30m3/h, 40m3/h, 50m3/h, 60m3/h, 70m3/h, 80m3/h, 90m3/h -----180m3/h
If any inquiry for our concrete pumps, pls contact us! We are pleased to make you our best offer.
The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.
For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick
Safe Seal Technology Co., Ltd. , https://www.aprseal.com