Model NO.: DN50 to DN600
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Water Industrial Usage
Pressure Test: 100%
Trademark: JUDIBODE
Specification: DN50 to DN600
Origin: China
HS Code: 8481804090
Model NO.: DN50 to DN600
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Water Industrial Usage
Pressure Test: 100%
Trademark: JUDIBODE
Specification: DN50 to DN600
Origin: China
HS Code: 8481804090
Gate valve1) Product information: The gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends type
4) Material:
A) Body: Ductile Iron GGG500-7
B) Wedge: D/I, core fully vulcanized with NBR or EPDM rubber
C) Wedge Nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440X20Cr13
E) Gasket: NBR
F) Bonnet: GGG500-7
G) O ring: NBR
H) Washer: Carbon steel or Stainless steel.
5) Size: 50-400mm/2" - 16"
6) Pressure grade: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 0.2-0.5mm inside and out side
B) Coating as per customers' requirement
8) package: Carton for each item, wooden boxes outside.
| Application | |||||||||
| 1 | Face to face is according to DIN3202-F4 | ||||||||
| 2 | Flange drilled is according to DIN2532/2533 | ||||||||
| 3 | Nominal pressure PN10/PN16 | ||||||||
| Test | |||||||||
| Working pressure | PN10 | PN16 | |||||||
| Shell pressure | 1.5MPa | 2.4MPa | |||||||
| Seat pressure | 1.1Mpa | 1.76MPa | |||||||
| Main Parts and Materials | |||||||||
| Number | Part Name | Material | |||||||
| 1 | Body | EN-GJL-250 | |||||||
| 2 | Seat ring | Brass | |||||||
| 3 | Wedge | CI+Brass | |||||||
| 5 | Wedge Nut | Brass | |||||||
| 6 | Stem | AISI 420 | |||||||
| 7 | Bonnet Gasket | EPDM | |||||||
| 9 | Bonnet | EN-GJL-250 | |||||||
| 12 | Stem Sealing | EPDM O Ring | |||||||
| 13 | Stuffing Nut | Brass | |||||||
| 21 | Dust Guard | EPDM/NBR | |||||||
| Main Dimensions | |||||||||
| Size | L | D | D1 | D2 | b | n-d | H | W | W.T |
| DN40 | 140 | 150 | 110 | 88 | 16 | 4-18 | 260 | 130 | 8.6 |
| DN50 | 150 | 165 | 125 | 102 | 18 | 4-18 | 265 | 130 | 10.9 |
| DN65 | 170 | 185 | 145 | 122 | 18 | 4-18 | 293 | 130 | 14.2 |
| DN80 | 180 | 200 | 160 | 138 | 20 | 8-18 | 318 | 150 | 20.3 |
| DN100 | 190 | 220 | 180 | 158 | 20 | 8-18 | 349 | 185 | 22.8 |
| DN125 | 200 | 250 | 210 | 188 | 20 | 8-18 | 416 | 185 | 33.9 |
| DN150 | 210 | 285 | 240 | 212 | 22 | 8-22 | 456 | 195 | 42 |
| DN200 | 230 | 340 | 295 | 268 | 24 | 8-22 | 537 | 225 | 63.4 |
| DN250 | 250 | 395 | 350 | 320 | 26 | 12-22 | 659 | 245 | 91.8 |
| DN300 | 270 | 445 | 400 | 370 | 26 | 12-22 | 718 | 285 | 138.6 |
Our gate valve photos Gate valve
1) Product information: The gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends type
4) Material:
A) Body: Ductile Iron GGG500-7
B) Wedge: D/I, core fully vulcanized with NBR or EPDM rubber
C) Wedge Nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440X20Cr13
E) Gasket: NBR
F) Bonnet: GGG500-7
G) O ring: NBR
H) Washer: Carbon steel or Stainless steel.
5) Size: 50-400mm/2" - 16"
6) Pressure grade: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 0.2-0.5mm inside and out side
B) Coating as per customers' requirement
8) package: Carton for each item, wooden boxes outside.
| Application | |||||||||
| 1 | Face to face is according to DIN3202-F4 | ||||||||
| 2 | Flange drilled is according to DIN2532/2533 | ||||||||
| 3 | Nominal pressure PN10/PN16 | ||||||||
| Test | |||||||||
| Working pressure | PN10 | PN16 | |||||||
| Shell pressure | 1.5MPa | 2.4MPa | |||||||
| Seat pressure | 1.1Mpa | 1.76MPa | |||||||
| Main Parts and Materials | |||||||||
| Number | Part Name | Material | |||||||
| 1 | Body | EN-GJL-250 | |||||||
| 2 | Seat ring | Brass | |||||||
| 3 | Wedge | CI+Brass | |||||||
| 5 | Wedge Nut | Brass | |||||||
| 6 | Stem | AISI 420 | |||||||
| 7 | Bonnet Gasket | EPDM | |||||||
| 9 | Bonnet | EN-GJL-250 | |||||||
| 12 | Stem Sealing | EPDM O Ring | |||||||
| 13 | Stuffing Nut | Brass | |||||||
| 21 | Dust Guard | EPDM/NBR | |||||||
| Main Dimensions | |||||||||
| Size | L | D | D1 | D2 | b | n-d | H | W | W.T |
| DN40 | 140 | 150 | 110 | 88 | 16 | 4-18 | 260 | 130 | 8.6 |
| DN50 | 150 | 165 | 125 | 102 | 18 | 4-18 | 265 | 130 | 10.9 |
| DN65 | 170 | 185 | 145 | 122 | 18 | 4-18 | 293 | 130 | 14.2 |
| DN80 | 180 | 200 | 160 | 138 | 20 | 8-18 | 318 | 150 | 20.3 |
| DN100 | 190 | 220 | 180 | 158 | 20 | 8-18 | 349 | 185 | 22.8 |
| DN125 | 200 | 250 | 210 | 188 | 20 | 8-18 | 416 | 185 | 33.9 |
| DN150 | 210 | 285 | 240 | 212 | 22 | 8-22 | 456 | 195 | 42 |
| DN200 | 230 | 340 | 295 | 268 | 24 | 8-22 | 537 | 225 | 63.4 |
| DN250 | 250 | 395 | 350 | 320 | 26 | 12-22 | 659 | 245 | 91.8 |
| DN300 | 270 | 445 | 400 | 370 | 26 | 12-22 | 718 | 285 | 138.6 |
Our gate valve photos
Crusher Production,Flat Blade Crusher,Heavy Industry Crusher,Dual Axis Crusher
DONGGUAN CARNO MACHINERY CO., LTD. , https://www.kainuochiller.com