Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>>Â Household Water Supply
>>Â Water Supply System
>>Â Cooling System
>>Â Boost System
GA101 WATER PUMPS FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.Â
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                               Â
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.Â
Besides, thermal protector in motor will interrupt current when motor overheats.
Â
| Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GA-101 | 0.13 | 100 | 0.8 | 6 | 20 | 22 | 0.5"X0.5" | 0.7-1.5 | 1 |
| GA-106 | 0.15 | 120 | 0.9 | 6 | 24 | 28 | 1"X1" | 0.7-1.5 | 1.5 |
| GA-108 | 0.5 | 370 | 1.5 | 8 | 32 | 35 | 1"X1" | 1.3-2.3 | 2 |
Â
| Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GA-120 | 0.15 | 120 | 0.9 | 6 | 20 | 26 | 1"X1" | 0.7-1.5 | 1 |
| GA-370 | 0.5 | 370 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.3-2.3 | 2 |
| GA-550 | 0.75 | 550 | 2.7 | 12 | 40 | 42 | 1"X1" | 1.7-3.3 | 2 |
| PS-127 | 0.5 | 370 | 1.8 | 10 | 32 | 35 | 1"X1" | Â | Â |
    Â
Production Work-flow Chart of Pump
Â
                                                  About us
    Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>>Â Household Water Supply
>>Â Water Supply System
>>Â Cooling System
>>Â Boost System
GA101 WATER PUMPS FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.Â
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                               Â
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.Â
Besides, thermal protector in motor will interrupt current when motor overheats.
Â
| Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GA-101 | 0.13 | 100 | 0.8 | 6 | 20 | 22 | 0.5"X0.5" | 0.7-1.5 | 1 |
| GA-106 | 0.15 | 120 | 0.9 | 6 | 24 | 28 | 1"X1" | 0.7-1.5 | 1.5 |
| GA-108 | 0.5 | 370 | 1.5 | 8 | 32 | 35 | 1"X1" | 1.3-2.3 | 2 |
Â
| Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GA-120 | 0.15 | 120 | 0.9 | 6 | 20 | 26 | 1"X1" | 0.7-1.5 | 1 |
| GA-370 | 0.5 | 370 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.3-2.3 | 2 |
| GA-550 | 0.75 | 550 | 2.7 | 12 | 40 | 42 | 1"X1" | 1.7-3.3 | 2 |
| PS-127 | 0.5 | 370 | 1.8 | 10 | 32 | 35 | 1"X1" | Â | Â |
    Â
Production Work-flow Chart of Pump
Â
                                                  About us
    Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Casting & Machining Material
1.Heat-resistant Alloy
K213,K403,K4169,K418,K438,K465,IN625,IN657,IN713C,IN713LC,IN718,IN738C,IN738LC,IN939,MAR-M247,A286,C-263,X-750,HastelloyX,Incoloy800,Incoloy825,25Cr-20Ni,40Ni-60Cr,50Ni-50Cr,NICKEL200.
2.Stainless Steel Alloy
301,304,304L,309,309S,310,310S,316,316L,317,321,347,410,430,1.4301,1.4310,1.4313,1.4401,1.4408,1.4541,1.4542,1.4550,1.4842,1.4828.
3.Aluminum Alloy
C355,ZL105A,ZL101A,A356,A380,AC4C,6061,7075,2A70
Our advantage on Investment Casting
1.Ten years Heat-resistant alloy Vacuum investment casting experience
2.Use pure silica sol processing to make the shell and choose America wax and Australian Zircon powder and sand.
3.Casting surface finishing degree is 1.6μm.
4.Strictly control and record the whole casting produce process , Promise every products our customer get is qualified.
Capacity Instruction
1.Sample precision field surveying and mapping , Complete custom processing.
2.According to the graphic drawing ,realize 3d modeling ,customized production.
3.The company built workshop 20000 m2, we have several professional engineer and inspector , production lines working at the same time , promise the products delivery on time
4.When production ,we finish different testing include: Raw material inspection ,first products inspection, process inspection and final inspection , we make sure our customer receive qualified products.
Mainly Testing Equipment
1.Non-destructive Testing
2.Surface Defect testing-----FPT Fluorescent Penetrant Testing
3.Inside Defecting Testing---- Radiography Testing
4.Size Testing-----Germany ZEISS CMM
Destructive Testing
1.Tensile Strength Test-----Room/High Temperature Tensile Testing Machine
2.Creep Strength Test-----Creep Tensile Testing Machine
3.Hardness Testing------ Rockwell Hardness Tester
4.Casting Surface Grain Size Testing Metallography Testing
5.Chemical Composition ------Germany SPETRO Spectorgraph
Ni resist ,iron casting,nickel base alloy castings
A&M Manufacturing Co.Ltd. , https://www.am-casting.com