- Model NO.: HQ-60
- Surface Finish Process: Polishing
- Process Combination Type: Progressive Die
- Runner: Cold Runner
- Certification: CE
- Working Stroke: 5mm
- Supercharge Ratio: 1:22
- Trademark: DONGHANG
- Shaping Mode: Plastic Molding Die
- Plastic Material: PVC,PS,Pet,PP Gxpp and PLA
- Application: Commodity, Electronic, Home Use
- Installation: Fixed
- Customized: Customized
- General Stroke: 100mm
- Air Consumption: 0.0095m3/(Min)
- Origin: China
We will depend on your different cup samples to design and make the different moulds, then the end products will be much better.
The molds includes forming part, punching part and cutting part.
Â
Product Description
This AL. Mould is our Cover Forming Machine's mould.
| Model | HQ-60 | HQ-200 |
| General Stroke | 100mm | 100mm |
| Working Stroke | 5mm | 5mm |
| Supercharge Ratio | 1:22 | 1:72 |
| Air Consumption | 0.0095m3/(min) | 0.054m3/min |
| Power Consumption | 100w/hr | 100w/hr |
| Max. Mould Size(mm) | 510×670 | 700×1300 |
| Air Pressure | 0.6-1.0Mpa | 0.6-1.0Mpa |
| Power | 220v 50Hz | 220v 50Hz |
| Speed Force(kgf) | 824-1374 | 1752-2920 |
| Returning Force(kgf) | 1580-2638 | 4500-7540 |
| Punch Force(T) | 38.4-66 | 128-220 |
| Weight(kg) | 2000 | 6000 |
| Dimension(mm) | 1220×1200×2050 | 3420×1500×2100 |
Â
In the process of Machining Titanium alloy, the titanium alloy material itself has low modulus of elasticity, large elastic deformation, high cutting temperature, low thermal conductivity and high chemical activity at high temperature, which makes the sticky knife phenomenon serious, easily aggravating the tool wear and even breakage, which leads to the poor machinability of the titanium alloy. Therefore, machining titanium alloy requires proper cutting tools and good machining technology.
Machining Titanium
Machining Titanium,Titanium Machining Parts,Titanium Cnc Turning Machining Parts
Buildre Group Co., Ltd. , http://www.bldcncmachining.com