Recently, new technologies, new products, and new ideas were seen at the first National Exhibition of Surveying and Mapping Geographic Information Technology organized by the China Surveying and Mapping Institute and the Surveying Instrument Branch of the China Instrument and Meter Industry Association.
In the exhibition hall of surveying and mapping equipment, if you do not see various surveying and mapping instruments on the booth, you may mistake it for a creative exhibition. The novelty of the exhibition booths, colorful decorations, changed the orthodox style of past surveying and mapping instruments and attracted unique audiences.
It is nothing new for a car to drive into a surveying and mapping equipment exhibition. A panoramic camera is installed on the roof of the car, and a moving laser measuring vehicle that follows and moves with the camera is representative of the most advanced new technology for surveying and mapping. The vehicle-mounted mobile measurement system developed by the team led by Liu Xianlin, an academician of the Chinese Academy of Engineering, has installed a domestic three-dimensional laser scanner, a digital photogrammetric system, and a positioning and orientation system, marking that China has entered the world's advanced ranks in this field. At Topcon's booth in Japan, the mobile measurement system was installed on a tricycle, and it may be more convenient and convenient to take pictures while riding the car. At the exhibition, the ubiquity of products at home and abroad shows that they are competing on the same stage.
The exhibition reveals that China's surveying and mapping equipment is shifting toward high precision, such as GPS handhelds, total stations, multi-mode multi-frequency GNSS chips, and even measuring scales.
Peng Zhenzhong, secretary general of the China Institute of Surveying and Mapping, stated: “China is a major producer of surveying and mapping equipment. The low-end and middle-end surveying and mapping instruments are basically at the same level as the world, but they are still catching up in the high-end areas.â€
At present, the market for domestic surveying and mapping instruments has gradually been brought into line with the international market, forming the pattern in which you and I have you. With the rapid development of several major surveying and mapping instrument manufacturers, such as Guangzhou South Surveying and Mapping, Beijing Bofei, and Suzhou Yiguang, the technological R&D capability has been continuously improved, and the products have their own advantages. This will take precedence in the low-end and middle-end surveying and mapping instrument market; Imported surveying and mapping equipment manufacturers, including Leica, Switzerland, all build factories in China and seek OEM partners to seize domestic low-end surveying and mapping equipment market.
With the development of information technology, surveying and mapping instruments, which are tools for spatial information data collection and processing, are no longer simply data collectors, but are collections of surveying and mapping data, records, storage, calculations, analysis, sorting, transmission, and The picture shows the integrated data processing center. Surveying and mapping instruments have evolved from traditional optomechanical products to integrated electro-optical, electromechanical, and telecommunication products, and have evolved from single instrumentation to hardware and software systems.
According to Liang Weiming, secretary general of the Surveying Instruments Branch of the China Instrument and Meter Industry Association, the stability, reliability, and product quality of domestic surveying and mapping instrument products have yet to be further improved. In the case of limited market capacity, the company must expand its industries and transition to the geographic information industry in order to develop.
Product Profile Large energy saving ceiling fans are green energy saving products of the 21st century. It has many advantages, such as powerful, no noise, zero pollution, low energy consumption. It is very popular for large masses of users. It is not only mainly used in steel structure plant, logistics warehouse, farm and other large enterprise buildings, but also agricultural markets, gymnasiums, waiting rooms, exhibition halls and other large public buildings. A large energy-saving ceiling fans with a speed of 50 revolutions per minute 1 to 3 meters per second to make the human body feels the best wind speed. A breeze from all directions gently caresses the body and increases the evaporation of human sweat. The cooling effect of 5 to 8 degrees is similar to the comfort presented by the natural breeze, which can not be matched by other fans. It is an ideal choice for indoor, ventilation and cooling in summer to remove humidity and heat. Only seven degrees of electricity per day, it can be cool for a whole summer. Energy saving comparation In summer, the sun shines directly and the indoor temperature is more than 40 degrees on average. Common industrial exhaust fans can only increase the indoor temperature. Industrial air conditioners consume thousands of kilowatts of energy every shift. There is no obvious unenclosed cooling in the space, which also increases the operating cost of enterprises. The emergence of a large energy saving ceiling fan brought the perfect solution. An energy saving fan with a diameter of 7.2meters can push the air to produce a large amount of winds effectively. The continuously rotating blades of circular form an airflow field with an effective area of 600 to 800 square meters. No other device has not yet been compared. The large energy-saving ceiling fan praduced by Linter technology has the characteristics of high reliability, feasibility and low power consumption. The controller unit used the stability of the energy-saving inverter system. In practice, the average power consumption is less than one killowatt per hour. It can guarantee more than 5,000 hours of uninterrupted operation. Linter7200 of a large energy-saving ceiling fan can cover the area of about 50 small fans of 0.75 megabytes worked. In a factory of 9000 square meters, if full coverage is to be achieved, it needs about 300 small fans or industrial 6 energy-saving fans. According to the use of four years, every eight months, every day for ten hours, can be run for 10,000 hours, about 90000kw power consumption, than the small wind 1080000kw, save 990000kw, save energy by 92%. When meeting the extreme high temperature climate, the large energy saving fans and air conditioners are used together, it will be coller. Using A large energy-saving ceiling fan for air supply can not only save the air conditioning tube, but also save more than 30% energy. Attentio Lectotype The building structure: H-shaped steel, I-shaped steel, Mixed steel square bar spherical column spherical structure. The total height of the building is more than 4, 0m, less than 15m. 1, 0m. The minimum distance between the fan and the roof is 1, 0m. The minimum safety distance between the fan blades and the obstacle is 0, 3 m. The distance between the fan blades and the wall on both sides is more than 1, 5 m. Effects of various environments on fan performance. Open space, promotes air circulation. Indoor airflow circulation in enclosed spaces is suitable for use with air conditioning. In a multi-fan environment, due to the low wind speed, caused by the fan, there will be no cyclones. The distance between the two fans will be separated before the wind will not cancel, and the coverage area will be increased at the same time. Company Information HongFa automatic door Technology (Shenzhen) Co., Ltd is a high-tech enterprise which engages in the development of advanced world-class automatic doors. Our main products include industrial fast rolling door, industrial PVC rolling door, industrial PVC rolling door, fast rolling door, rolling door, fast rolling door, rolling door, industrial automatic lifting door, industrial automatic lifting door, automatic vertical hinged door, automatic stainless steel door, automatic doors, automatic doors, electric folding gate, rolling door, automatic doors, automatic doors, automatic doors, automatic doors,
Industrial ceiling fan,electric fan,industrial fan
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahss.com