Conductor conductors are made of red copper with a copper content of 99.95% or more. The copper cross section is trapezoidal. The nominal area is 500mm2. The error range is not greater than the national standard. The rated current is not less than 1500A. The rated voltage is 400V. The insulation voltage is 660V. The voltage drop at the location of the pole contact is less than 5%. The conductivity of the conductor is 98%, the TMY Brinell hardness HB is a minimum of 65, and the tensile strength is: 206-380 N/m2 or more. The resistivity t20Ω?mm2/m is not more than 0.01777, and the copper busbar density is 8.89g/cm3 at 20C.
Under normal circumstances, sliding wire collector slider material: copper carbon alloy, the contact pressure of the collector is greater than 28N, the maximum allowable operating deviation of the current collector ± 20mm, vertical ± 20mm. The current collector should have good contact with the sliding wire. The current collector should have a reasonable structure, excellent materials, moderate tensile tension and moderate contact between the brush and the slide rail. No spark phenomenon, high temperature does not oxidize. When maintaining high-speed movement, the above electrical performance can be maintained, and the life of the collector should be more than 10 years.
Second, the characteristics of the new type of touch line The new type of touch line using advanced foreign technology carefully researched and developed, for the domestic first small size, light weight, easy disassembly, low price, easy maintenance and so on. If the user has special requirements, he can design and produce according to the requirements.
Insulated sliding wire length of 6 meters
HXPnR-G
630A
800A
1000A
1250A
Part number with standard phase jacket
345102
345205
345542
345606
Part number with standard ground sheath
345123
345249
345557
345645
Parts number with medium heat resistant jacket
345104
345299
345513
345610
Weight (Kg)
10. 380
12. 660
17. 280
20. 580
The new trolley wires are made of oxygen-free copper with excellent corrosion resistance and excellent electrical conductivity as conductors, which have the advantages of high allowable current density and low impedance. The sliding contact surface of the aluminum alloy sliding wire is used to make the contact between the current collector and the sliding surface of the guide rail more reliable and stable. Because the guide rails have the same dimensions as the aluminum guide rails, the accessories can be interchanged, demonstrating the versatility of the product. While meeting the mobile device's power, it can be used for the fixed device's power transmission bus or workshop bus.
Inflatable Toys High Frequency Welding Machine
Inflatable Toys High Frequency Welding Machine is a high frequency device, whose self-exited oscillator of the electron tube can produce high frequency electromagnetic field. And the plastic to be processed is in the high frequency electromagnetic field between the upper and low electrode. When its interior molecules are polarized and produce heat automatically by mutual movement and friction, it will be welded with the pressure of the die.
Mattress Making Machine,Inflatable Toys High Frequency Welding Machine,Pvc Air Mattress Making Machine,Life Jacket Making Machine
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wfengmachinery.com