Blowing Moulds Bottle Blow Mould/Bottle Mould/Pet Blow Mold

Blowing Moulds Bottle Blow Mould/Bottle Mould/PET Blow Mold





Pet Bottle Mould can be blowed by fully automatic blowing mould machine and semi automatic blowing mahcine. Our machine have 1to 8 cavities, can blow 0.2L-20L bottle.
The Mold Features:
1.1 cavity to 8 cavity  
2. For bottle preform  
3. Quality mould steel specially treated.  
4. To make all of the components of the mould to be against the rust and corrosion with long lifetime.
5. The life of the mould is more than 2.5 million times.




 

Alloy Anchors

There are many shapes of metal anchors, such as Y-shaped, V-shaped, T-shaped, S-shaped, etc. (see Figure 1). Metal anchors are refractory castables, refractory plastics and refractory spray coatings used to support and fix thinner liners. Which shape of metal anchor to use depends on the structure of the lining. The shape of the Ceramic Anchor is shown in Figure 2. The upper and lower ends must be flat, and the remaining 4 sides are toothed to increase the occlusal area and friction with the lining body, and play a role of suspension and support

Alloy Anchors,Y Anchors,Studs Anchors,Aluminum Alloy Anchors

Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com