ã€cause of issue】
1, pump reverse.
2, the pump speed is too low.
3, pump impeller loose or equipped with anti.
4, pump impeller blades wound a lot of debris.
5, the pump shaft tripping or fracture.
6, Yang pipe serious water leaks.
7, pump impeller submerged depth is not enough.
8, the pump installation head exceeds the total head of the pump, or move the water level dropped beyond the allowable range.
9, winter use, the pipe in the frozen water.
ã€Maintenance Methods】
1, for the type of power machine used by the pump, respectively, to adjust the direction of rotation of the pump.
2, according to pump different forms of power machines, respectively, to increase the speed.
3, the demolition of post-mortem? Blockage tomb 㷠髯 stabbed? H 绻? Site ⑸? Appreciate strict 窒 螅 蛴 蛴 blocking paper? Goshimizu 虢 蹋 蹋 locust 绻? Site mire? Πto find plugging value 淖 涔 涔 find 笾 匦 Lu? Evil Cang?? ⒆⒠艄 艄 Peach Garden Music Awards? / Div>
4, the first stop, take the first method of flushing back to clean winding debris. If you can not rule out trouble or winding debris removal is not complete, then the axial flow pump should be disassembled and overhauled to clean the entangled debris on the impeller blades.
5, after dismantling repair. If the pump shaft is tripped, the pump shaft should be reinstalled in accordance with the assembly process requirements of the axial flow pump; if the pump shaft breaks, repair or replace the pump shaft.
6, identify the axial leakage pump concrete pump leaks, respectively, depending on the circumstances were repaired or replaced.
7, appropriate to reduce the installation of the pump height, and re-install the pump.
8, appropriate to increase the pump speed, increase the impeller series, or replace the larger power matching power machine.
9, first clear the pump pipe in the icing, and then boot.
Flying Banner,Flying Signs Banners,Fly A Banner,The Flying Banners
SUZHOU JH DISPLAY&EXHIBITION EQUIPMENT CO.,LTD , https://www.jh-posterstand.com