For the production of large-ton small-scale targets in the production process of automobile manufacturers, they will be punished as soon as they are verified! The reporter learned from the Provincial Economy Commission yesterday that, according to the province’s further strengthening of vehicle production enterprises and product management work arrangements, the province will, from that day onward, further strengthen vehicle production enterprises and product management in the province. Which made clear requirements for the production of large-ton small-scale and three-wheeled vehicles.
According to the inspection work arrangement, local and various automobile production enterprises must strictly implement the vehicle technical specifications such as the “National Automobile Development Enterprises and Products Announcement†issued by the National Development and Reform Commission, and continue to change the technical parameters of “large tonnage and small scale†in-use vehicles throughout the province. jobs. It is strictly forbidden for auto manufacturing companies to “modulate†the illegally modified vehicle products for customers, and resolutely put an end to “large-ton small-scale†or illegally modifying vehicles.
All localities and companies must clean up the production addresses of companies and products. Where the production address and the certificate of conformity of the enterprise are inconsistent, it is necessary to complete the formalities for re-submitting, and to conduct self-examinations and resolutely eliminate the production sites and joint ventures of some enterprises operating in different places. Each automobile production enterprise shall conduct a comprehensive self-examination and rectification of its production conditions in accordance with the State's "Automobile Production Condition Assessment Criteria" to further improve the production conditions of the enterprise. The self-examination of some enterprises' arbitrarily changing engine configuration, lowering emission standards, and reducing the safety of vehicles shall be conducted; if it is inconsistent, it shall be immediately rectified and corrected.
According to the staff of the Provincial Economic Commission, according to the requirements of the National Development and Reform Commission, from June 1 this year, the original three-wheeled, four-wheeled agricultural transport vehicles were renamed "three-wheeled vehicles" and "low-speed trucks." The three-wheeled vehicles, low-speed truck manufacturing enterprises and products should apply for product name changes through the declaration system before November 10 of this year. Enterprises that have not submitted applications before December 31st will have their production qualifications automatically revoked; products with product names that are not in compliance with the provisions of the “Announcement of Automobile Production Enterprises and Products†starting from January 1, 2007 will be withdrawn from the “Announcement†and No more sales.
Metal Body Square Water Cooling Tower
This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results.
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.
Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com