Automatic Purified Water Pet Bottle Blower

Automatic  PET Bottle Blowing Machine

Blowing Machine is specially designed to produce 5-gallon bottle and 25L wide mouth jar. Its output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.

Features:
1. Special design for PET Gallon Bottle up to 6 Gallon
2. Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform
3. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
4. Water cooling system ensures the quality of preform neck.
5. Use advanced PLC control system with counting function and time-control precision to 0.01second, and a use-friendly panel.
6. Equipped with special designed air storage units


Features of PET bottle blow moulding equipment:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: Automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: Less than 0.2 percent.

Confirguration of PET bottle blow moulding equipment:

Wedge Wire Screen

Wedge Wire Screen,Wedge Wire,Wedge Wire Scree,Wedge Screen

glorybest industry co.,ltd , https://www.glorybestfilter.com