Application of Fire Pump Automatic Inspection Control Equipment

The product is suitable for fire pumps and showers in hotels, hospitals, shopping malls, supermarkets, high-rise office buildings, theaters, museums, exhibition centers, stadiums, airports, railway stations, subways, industrial and mining enterprises, schools and other public places or large buildings. Daily inspection of fire-fighting facilities such as pumps, periodic inspection of the fire pump, fixed-time, and write-speed inspections. Through automatic inspection, the fire pump is maintained in a reliable state for a long period of time.

Fire Pump Automatic Inspection Control Equipment Features

● Inspection cycle Each inspection time can be set by itself, and the system can automatically determine whether the fire pump can start normally.

● The patrol inspection of fire-fighting pumps adopts low-frequency and low-speed operation. The patrol inspection power consumption is small, and it will not pressurize the water supply pipe network, and will not increase the mechanical wear of the water pump.

● Immediately after receiving the fire command 0.5 seconds, it will automatically exit the operation and switch to the industrial frequency circuit to ensure normal operation of the fire pump in case of fire.

● During the automatic inspection, the electrical components of the main circuit of the electronic control equipment can be tested to ensure the reliable operation of the electrical control equipment.

● The state and operation process of the water pump detection running are displayed by LED and LCD. The touch screen can set and operate its working state.

● With fault memory function, with RS232, RS485 communication interface, can be networked with the terminal computer to achieve process monitoring.

● With extended functions, optional circuit inspection, pipeline inspection, GPRS communication, printer and control bus communication modules.

● Has the wrong phase, phase loss, undervoltage, overvoltage, overcurrent, short circuit and other protection functions.

● When the fire pump is started, the system uses interlock control on the software to ensure that only one pump is running at any time; when a failure occurs, the system will automatically perform protection.

Packing Machine

Blister packing machine are widely used in the pharmaceutical industry of capsule,tablet and pilled foodstuff,food industry ,liquid chocolate candies,chewing gum,jam,facial mask,eye of the cosmetics industry,medical device industry,needles,syringes,infusion tube and electronic component products such as aluminum-plastic ,paper-plastic blister packing

1.pulling length can be adjusted,mold is fixed by located groove so that it's easy to change mold.the machine heats the PVC through heated board and forms by compressed air frothing

2.speed is controlled by inverter,it adopts the interface of human-machine and PLC control system

3.with automatic feeder,we can design the mould and feeder according to customer's requirement

4.the machine gets the function for easy cutting line embossing,batch number embossing and wasted packing material rewinding

5.step motor is adopted on the machine for precise controlling the pulling length and saving packing material

6.the heating molds will automatically separate when the machine stops,which contributes to protect the packing material from heated mould

In addition we also have other machines for u chosoe,such as spices Powder Pulverizer,powder mixer,Capsule Filling Machine,capsule Polishing Machine,Capsule Counting Machine,tablet press,vacuum dryer etc

Packing Machine,Blister Packing Machine,Blister Packer,Tablet Packaging Machine

Jiangyin yongchang medicine machinery co,.ltd , http://www.ycgrinderline.com