Many cities now have water spray vehicles on the streets that were used more when trees were sprayed with pesticides. Nowadays, many cities turn sanitation sprinklers into sprayers , which solves the problem of sprinklers flooding people. Let's introduce the sprayer
Â
The sprayer is also called a spray duster. It is converted from a stereotyped automobile chassis or other special chassis. The sprayer sprays the trees to form a uniform mist. The coverage rate of the liquid is more than 50 percent, and the wind transports it. Coverage can reach 60 percent. When the asphalt road is sprayed, the sludge, skin peel, leaves, etc. on the road surface can be flushed to both sides of the road, and the humidity is uniform humidity.
For the maintenance of the sprayer vehicle, we must properly maintain and maintain it in accordance with the provisions of the vehicle manual specified by the sprayer manufacturer. During maintenance, the spray pump and spray pump must not be allowed to dry for a long period of time. For longer periods of idling, a small amount of water should be introduced into the pump. In the cold regions of the North, after each use, the liquid remaining in the spray pump, spray pump, and pipeline must be cleaned in a timely manner to prevent freezing of parts. When the sprinkling system of the sprayer's sprinkling air control system leaks, there is no way to eliminate the problem in a timely manner, and the copper tube directly extending from the air reservoir of the vehicle can be screwed down and down, so that the air path of the control system can be cut off. Then block the corresponding air hole in the air reservoir so as not to affect the normal operation of the vehicle brake system.
When not used for long spray vehicles, fuel and water and other liquids should spray the car exhausted. The sprayer should be parked in a place with ventilation, moisture, sun protection and fire-fighting facilities. When used after parking for more than one month, the sprayer shall be inspected, maintained and maintained strictly in accordance with the instructions for use. After each use in the northern regions of the country, the water release screws in the pump and pipeline should be released and the residual liquid should be drained to prevent freezing and cracking of parts. When the pressure in the air chamber of the diaphragm pump does not reach the specified value, the air cylinder is used for inflation. Watering and spraying can not be performed at the same time. (Wen/Jun Xun)
Â
3 Ton Multi-directional Forklift
Zowell RSEW130 Multi-Directional Forklift is a material handling equipment specialized for long and bulky material handling and stacking. Its unique design covers the advantages of common forklifts and stackers as well as VNA trucks. With three omni-directional wheels, it can drive in multiple directions such as parallel moving and oblique moving, so as able to maneuver smaller aisles and maximize your warehouse storage safely.
As a company with experience on narrow aisle electric forklifts for more than 15 years, Zowell always focuses on professional warehouse solutions and customer experience. In terms of power supply, RSEW adopts electric power featured with low noise and no emission, and can be equipped with lithium battery with convenient maintenance and longer service life. In terms of control, the load wheels are equipped with the five-stage steering deceleration and small control current, which enables the steering angle more precise and controllable, effectively extend the service life of the steering motor. From the aspect of security, Zowell multi-directional forklift is equipped with steering wheels display system and barking system to maximize safety.
hubtex multidirectional forklift,multi directional reach forklift,multi directional forklift price,multi directional forklift brands
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com