300-3600 M3/H Oil-Free Air Roots Vacuum Pump for Chemical Industry

DRF Series Roots Vacuum Pumps 

Advantages
DRF series roots vacuum pump is a technically mature vacuum pumping equipment, which help fore vacuum pump expand its working range under low inlet pressure condition after combing with fore vacuum pump:
1.Improve vacuum degree.
System vacuum degree could be enhanced to one order of magnitude higher if equipping with roots vacuum pump. If with 2 stage roots vacuum pump, performance could be even higher.

2.Increase pumping speed.
A pair of rotors of roots pump doesn't contact with each other while rotating in high speed mode, which means small size roots pump also can be with high pumping speed. Fore vacuum pump can pump large capacity air in low speed by selecting suitable roots pump, obviously reducing energy consumption comparing with single fore vacuum pump with same speed.

3.Oil free
No oil in pump chamber of roots pump, no pollution on the pumped medium.
4.Superior character.
With transmission system adopting flexible hydraulic device - a kind of high-efficiency power transmission method, DRF series roots vacuum pump is with compact structure and superior characters as below:
1).Under reducing bypass pipes and valves installed or leaving inverter out designing condition, vacuum pump could acquire much better pumping effect than traditional booster pump, significantly saving production cost of hardware and decreasing the controlling requirement.
2).Hydraulic transmission device could automatically adjust pumping speed, motor will not be overloading or overheating even pumps work under high pressure condition.
3).Comparing with traditional direct driven, Roots vacuum pump will not get damaged even while inlet pressure changes in a sudden or aspiring foreign matter, stop failure rate can be much reduced.
4).At atmospheric pressure, DRF series roots vacuum pump can start with fore vacuum pump in the same time but motor will not be overloading, which can work for pumping process in earlier stage, shortening visibly pumping time, especially applying to applications which require for fast pumping speed.
5).Running in very smooth way, tiny vibration.
6).Reliable Bearing sealing structure which ensures that no lubricant in pump chamber.
7).No bypass and valves, easy and simple maintainence.

Application
1.Industry: medical technology, industrial leakage detecting, electron beam welding, vacuum isolating, lamps&tubes manufacturing, heating processing,vacuum drying, lyophilization, vacuum furnace, metallurgical engineering.
2.R&D: nuclear research, melt technology, plasma research, tevatron, spatial simulation, low temperature research, elementary particle physics, nanotechnology, biotechnology.
3.Coating&Metallization: FPD(flat-panel display), LED/OLED, hard disk coating, photovoltaic cell, glass-type coating, CD-DVD-Blue ray, optical filming, wear-resistant coating.
4.Semiconductor: photoetching, printing & graphic arts, physical vapor deposition, chemical vapor deposition, plasma etching, ion implantation, beam injection, viewing, gluing, molecular beam epitaxy.


Technical Prameters
 *) Specifications are subject to change without prior notice



Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: NO.10, Xinhao Road,Jinshan District ,Shanghai City, China. 

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.


Contact DENAIR 

Company Name: DENAIR Energy Saving Technology (Shanghai) PLC

Telephone: +86-021-61278021

Fax: +86-021-57865043

Website: http://www.denair.net
  DRF Series Roots Vacuum Pumps 

Advantages
DRF series roots vacuum pump is a technically mature vacuum pumping equipment, which help fore vacuum pump expand its working range under low inlet pressure condition after combing with fore vacuum pump:
1.Improve vacuum degree.
System vacuum degree could be enhanced to one order of magnitude higher if equipping with roots vacuum pump. If with 2 stage roots vacuum pump, performance could be even higher.

2.Increase pumping speed.
A pair of rotors of roots pump doesn't contact with each other while rotating in high speed mode, which means small size roots pump also can be with high pumping speed. Fore vacuum pump can pump large capacity air in low speed by selecting suitable roots pump, obviously reducing energy consumption comparing with single fore vacuum pump with same speed.

3.Oil free
No oil in pump chamber of roots pump, no pollution on the pumped medium.
4.Superior character.
With transmission system adopting flexible hydraulic device - a kind of high-efficiency power transmission method, DRF series roots vacuum pump is with compact structure and superior characters as below:
1).Under reducing bypass pipes and valves installed or leaving inverter out designing condition, vacuum pump could acquire much better pumping effect than traditional booster pump, significantly saving production cost of hardware and decreasing the controlling requirement.
2).Hydraulic transmission device could automatically adjust pumping speed, motor will not be overloading or overheating even pumps work under high pressure condition.
3).Comparing with traditional direct driven, Roots vacuum pump will not get damaged even while inlet pressure changes in a sudden or aspiring foreign matter, stop failure rate can be much reduced.
4).At atmospheric pressure, DRF series roots vacuum pump can start with fore vacuum pump in the same time but motor will not be overloading, which can work for pumping process in earlier stage, shortening visibly pumping time, especially applying to applications which require for fast pumping speed.
5).Running in very smooth way, tiny vibration.
6).Reliable bearing sealing structure which ensures that no lubricant in pump chamber.
7).No bypass and valves, easy and simple maintainence.

Application
1.Industry: medical technology, industrial leakage detecting, electron beam welding, vacuum isolating, lamps&tubes manufacturing, heating processing,vacuum drying, lyophilization, vacuum furnace, metallurgical engineering.
2.R&D: nuclear research, melt technology, plasma research, tevatron, spatial simulation, low temperature research, elementary particle physics, nanotechnology, biotechnology.
3.Coating&Metallization: FPD(flat-panel display), LED/OLED, hard disk coating, photovoltaic cell, glass-type coating, CD-DVD-Blue ray, optical filming, wear-resistant coating.
4.Semiconductor: photoetching, printing & graphic arts, physical vapor deposition, chemical vapor deposition, plasma etching, ion implantation, beam injection, viewing, gluing, molecular beam epitaxy.


Technical Prameters
 *) Specifications are subject to change without prior notice



Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: NO.10, Xinhao Road,Jinshan District ,Shanghai City, China. 

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.


Contact DENAIR 

Company Name: DENAIR Energy Saving Technology (Shanghai) PLC

Telephone: +86-021-61278021

Fax: +86-021-57865043

Website: http://www.denair.net
 

Oil pumps are forced feed to oil to each friction surface under raising oil pressure and ensuring engine oil capacity.

Oil pumps are divided into Rotor Oil pumps and Gear Oil pumps. Most of automotive oil pumps are gear pumps. When the car`s engine begins to work, the engine shaft drives the Oil Pump gear. In high speed operation, it forms a strong positive and negative pressure around the internal and external of oil pump, and the oil is sucked by oil pump, pressuring to the engine parts, so as to realize a kind of compulsory lubrication. And oil pump, here, increase the internal and external pressure difference. The faster the speed, the greater the pressure, and the lube oil floe is faster, more comfortable car run up.

Oil Pump

Oil Pump,Engine Oil Pump,Gear Oil Pump,Hydraulic Oil Pump,Rotor Oil Pump

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com