Applicable Range:
Pressure in the seal chamber: 0-1.2MPa
Temperature in the seal chamber: -30ºC------180ºC
Linear Velocity: ≤10m/s
Medium: water,oil,and minor corrosive liquid
Static ring code: KL108,KL1,KL9,G60
Note: if adopt the rolling by circle spring,pls pay attention to the direction of rolling.see details by installment and instructions(5)
Static rings:
Features:
For plain shafts
High flexibility due to wide offer on materials
Dimension adaptions and additional seats available
Applications:
Process industry
Chemical industry
Pulp and paper industry
Water and waste water technology
Sugar industry
| Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â |
| Model(mm) | d | d1 | d2 | d3 | D | D1 | L | L1 | L2 | L3 | L4 | L5 | L6 | Â | Â | Â | Â | Â |
| Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â |
| KL120-18 | 18 | 22.0 | 32 | 2.0 | 33 | 27 | 43.0 | 36 | 19.0 | 5.0 | 3.5 | 7.5 | 24 | Â | Â | Â | Â | Â |
| KL120-20 | 20 | 24.0 | 34 | 2.0 | 35 | 29 | 43.0 | 36 | 18.0 | 5.0 | 3.5 | 7.0 | 25 | Â | Â | Â | Â | Â |
| KL120-25 | 25 | 30.2 | 39 | 2.5 | 40 | 34 | 47.0 | 40 | 19.0 | 5.0 | 3.5 | 8.5 | 28 | Â | Â | Â | Â | Â |
| KL120-28 | 28 | 33.0 | 42 | 2.5 | 43 | 37 | 47.0 | 40 | 19.0 | 5.0 | 3.5 | 9.0 | 28 | Â | Â | Â | Â | Â |
| KL120-30 | 30 | 35.0 | 44 | 2.5 | 45 | 39 | 50.0 | 43 | 19.0 | 5.0 | 3.5 | 8.5 | 31 | Â | Â | Â | Â | Â |
| KL120-35 | 35 | 39.5 | 49 | 3.0 | 50 | 44 | 53.0 | 46 | 20.0 | 5.0 | 3.5 | 8.5 | 33 | Â | Â | Â | Â | Â |
| KL120-40 | 40 | 46.0 | 57 | 3.0 | 58 | 51 | 57.0 | 50 | 20.0 | 5.0 | 3.5 | 9.0 | 37 | Â | Â | Â | Â | Â |
| KL120-45 | 45 | 51.0 | 62 | 4.0 | 63 | 56 | 61.0 | 54 | 20.0 | 5.0 | 3.5 | 9.5 | 41 | Â | Â | Â | Â | Â |
| KL120-50 | 50 | 55.5 | 69 | 4.0 | 70 | 62 | 62.0 | 55 | 21.0 | 6.5 | 3.5 | 10.0 | 41 | Â | Â | Â | Â | Â |
| KL120-55 | 55 | 61.5 | 74 | 4.0 | 75 | 67 | 64.0 | 57 | 22.0 | 6.5 | 3.5 | 10.5 | 42 | Â | Â | Â | Â | Â |
| KL120-60 | 60 | 67.5 | 79 | 5.0 | 80 | 72 | 65.0 | 58 | 22.0 | 6.5 | 4.0 | 11.5 | 43 | Â | Â | Â | Â | Â |
| KL120-65 | 65 | 71.5 | 84 | 5.0 | 85 | 77 | 67.0 | 60 | 22.0 | 6.5 | 4.0 | 11.5 | 45 | Â | Â | Â | Â | Â |
| KL120-70 | 70 | 77.0 | 91 | 5.5 | 92 | 83 | 70.0 | 63 | 25.0 | 6.5 | 4.0 | 11.5 | 45 | Â | Â | Â | Â | Â |
| KL120-75 | 75 | 82.0 | 97 | 5.5 | 97 | 88 | 72.0 | 65 | 25.0 | 6.5 | 5.5 | 11.5 | 47 | Â | Â | Â | Â | Â |
| KL120-80 | 80 | 89.0 | 104 | 5.5 | 105 | 95 | 72.0 | 65 | 25.0 | 6.5 | 5.5 | 12.0 | 47 | Â | Â | Â | Â | Â |
| NOTE: | ,,5. | Â | Â | Â | Â | Â | Â | Â | Â | |||||||||
| IF ADOPT THE ROLLING BY CIRCLE SPRING.PLS PAY ATTENTION TO THE DIRECTION OF ROLLING.SEE DETAILS BY INSTALLMENT & INSTRUCTIONS(5) Â Â | ||||||||||||||||||
METHYLENE CHLORIDE Chemical formula: CH2Cl2 molar mass: 84.93 g • mol ⻠¹ Appearance: Colorless liquid Molecular formula: CH2Cl2, is a low boiling point colorless liquid, is an important organic solvent, widely used in pharmaceutical, plastic, film and other industrial applications: used in the nickel and zinc electroplating industry, ceramic industry Solvent solvents are the most important uses of dichloromethane. Dichloromethane has a broad spectrum of solubility, low boiling point, relatively lowest toxicity, and relatively best reaction inertia, making it the most frequently used organic solvent in organic synthesis. As a solvent, its status is almost equivalent to that of water in inorganic salt chemistry. Dichloromethane, the raw material for organic synthesis, is inert due to the three-dimensional Electronic effect and usually does not participate in chemical reactions. However, it can also participate in the reaction under certain conditions. In industry, there was an accident that residual dichloromethane reacted with sodium azide in N, N-dimethylformamide to produce methane azide, which led to factory explosion.
R 30,Refrigerant 30,solaesthin; solmethine,narkotil
Henan Chuange Industry CO.,LTD , https://www.cgpvcresin.com